Double Zebra Roller Blind
Recommended Measurement Instructions:
- Above the window: Add 15cm to the total height of the window and 20cm to the total width. The width of the fabric will be 3.5cm smaller than the total width of the roller due to the mechanism.
- Inside the window recess (Frame): Measure the internal dimensions of the recess and subtract 1 centimeter from the right and left sides to prevent the roller from touching the surfaces of the recess.
Installing the roller inside the frame is only allowed if there is a gap between the opening window and the top of the frame. Otherwise, it must be mounted above the frame on the wall.
Control Position (chain): The position of the control is a matter of personal preference; ensure it does not obstruct movement by any object.
Rolling direction: Whether it is rolled with method A or B depends on whether there is an obstacle preventing the vertical movement of the fabric.
Notes:
- The fabric color may vary slightly from what you see on your screen.
- The fabric width is 3.5cm smaller than the total width of the roller.
- The weighted bar of the fabric is covered with the same fabric as the roller.
- Total packaging weight: approximately 2kg.
Specifications
- Pattern
- Monochrome
- Colour
- Orange
- Blackout
- Partial Blackout
- Double
- Yes
Dimensions
- Dimension
- 100x200 cm
- Width
- 100 cm
- Height
- 200 cm
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.