Double Zebra Blockout Roller Blind
Recommended Measurement Instructions:
- A) Above the window: Add 15cm to the total height of the window and 20cm to the total width. The fabric width will be 3.5cm smaller than the total roller width due to the mechanism.
- B) Inside the window recess (Frame): Measure the inner dimensions of the recess and subtract 1 centimeter from the right and left sides.
Note: If the window opens inward, the roller can only be installed inside the frame if there is clearance between the opening window and the top of the frame.
Control Position (chain): The position of the control is a personal choice. It is usually placed on the hinge side.
Wrapping Direction: The wrapping can be done either in way A or way B, depending on the conditions around the window.
Notes:
- The shade displayed on your screen may differ slightly from the fabric.
- The fabric width is exactly 3.5cm narrower than the total roller width.
- The fabric weighting end cap is covered with the same fabric as the roller.
- Overall packaging weight: approximately 2kg.
Specifications
- Pattern
- -
- Colour
- Red
- Blackout
- Total Blackout
- Double
- Yes
Dimensions
- Dimension
- 100x100 cm
- Width
- 100 cm
- Height
- 100 cm
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.