Double Zebra Roller Blind
Recommended measurement instructions:
- Above the window: Add 15cm to the total height of the window and 20cm to the total width. The fabric width will be 3.5cm narrower than the total roller width.
- Inside a window recess (alcove): Measure the internal dimensions of the recess and subtract 1 centimeter from the right and left sides.
Special notes:
- If the window opens inward, the roller can only be installed inside the frame if there is a gap between the opening window and the top of the frame.
- Otherwise, the roller must be installed above the frame, on the wall.
Handle position: The handle position is a personal choice, make sure it does not obstruct movement.
Roller winding: The winding can be done either with method A or method B, depending on the conditions of the window or door.
- The fabric shade may have a color deviation from what you see on your screen.
- The fabric width is 3.5cm narrower than the total roller width.
- The weight of the fabric's ballast is covered with the same fabric as the roller.
- Total packaging weight: approximately 2kg.
Specifications
- Pattern
- Monochrome
- Colour
- Red
- Blackout
- Partial Blackout
- Double
- Yes
Dimensions
- Dimension
- 100x200 cm
- Width
- 100 cm
- Height
- 200 cm
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.