Double Zebra Roller Blind
Recommended Measuring Instructions
- Above the window: Add 15cm to the total height of the window and 20cm to the total width. The fabric width will be 3.5cm smaller than the total width of the roller due to the mechanism.
- Inside the window recess: Measure the internal dimensions of the recess and subtract 1 centimeter from the right and left sides to prevent the roller from touching the surfaces of the recess.
Note: If the window opens inward, the roller can only be installed inside the frame if there is a gap between the opening window and the top of the frame. Otherwise, the roller must be mounted above the frame, on the wall.
Control Position (chain): The position of the control is a matter of personal preference. It is important that it is not obstructed by any objects.
Rolling Direction: The winding can be done either in Method A or Method B, depending on the presence of an object that may hinder the movement of the fabric.
Notes:
- The color you see on your screen may differ slightly from the actual fabric.
- The fabric width is exactly 3.5cm smaller than the total width of the roller.
- The fabric weight is padded with the same fabric as the roller.
- Total packaging weight: approximately 2kg.
Specifications
- Pattern
- Monochrome
- Colour
- Yellow
- Blackout
- Partial Blackout
- Double
- Yes
Dimensions
- Dimension
- 100x100 cm
- Width
- 100 cm
- Height
- 100 cm
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.