Usage instructions: The surface must be clean, dry, and free of grease. Remove flaking from old paints, then sand and apply a primer. The spray can should be at room temperature. Before use, shake the can well for 2-3 minutes. Check the color and compatibility of the varnish on an inconspicuous area. Spray several thin, cross coats from a distance of about 25 cm. During application, ensure good ventilation (without drafts) and carefully cover the surrounding area.

Warning word: Danger.

Hazardous components: Acetone, Hydrocarbons C9-C11, straight-chain alkanes (n-alkanes), branched alkanes (isoalkanes), cyclic hydrocarbons, aromatic.

• Hazard statements: Extremely flammable aerosol. Pressurized container. May burst if heated. Causes serious eye irritation. May cause drowsiness or dizziness.
• Precautionary statements: If medical advice is needed, have the product container or label at hand. Keep out of reach of children. Keep away from heat, hot surfaces, sparks, open flames, and other sources of ignition. Do not smoke. Do not spray near an open flame or other ignition sources. Do not pierce or burn, even after use. Do not breathe spray fumes. Protect from sunlight. Do not expose to temperatures exceeding 50°C. Dispose of contents/container according to local regulations.

Additional statements: EUH066 Repeated exposure may cause dryness or cracking of the skin. Explosive mixtures may form in poorly ventilated areas. EUH211 Warning! Dangerous respiratory droplets may be formed during spraying. Do not inhale spray or mist.

Additional information: The benzene content (EINECS No. 200-753-7) in the ingredients is less than 0.1% (Note P, Annex 1A of Regulation 1272/2008 EU), therefore classification as carcinogenic is not required.