Skroutz.cy

DDT Single-phase Water Pump 4.13hp
Submersible Water Pumps

DDT Single-phase Water Pump 4.13hp

The DDT Professional WQCD10-10-0.95F water pump is specialized equipment for the rapid removal of dirty and muddy water or water containing solid particles. It features a powerful 3100W motor and...

The DDT Professional WQCD10-10-0.95F water pump is specialized equipment for the rapid removal of dirty and muddy water or water containing solid particles. It features a powerful 3100W motor and pumping capacity of up to 25,000 liters/hour, offering excellent performance in any situation, from draining basements and tanks to emptying cesspools and...

See full description See full description

Top specs

  • Horsepower

    Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).

  • Voltage

    Single-Phase

    Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 

  • Power

    It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.

  • Manometric Height

    20

    The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

    • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
    • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
  • See all
The product is not available for shipping to the selected country.
Review the product
Product report

Description

Description

The DDT Professional WQCD10-10-0.95F water pump is specialized equipment for the rapid removal of dirty and muddy water or water containing solid particles. It features a powerful 3100W motor and pumping capacity of up to 25,000 liters/hour, offering excellent performance in any situation, from draining basements and tanks to emptying cesspools and irrigating agricultural areas.

Made from durable and corrosion-resistant materials, the DDT pump is designed for long-term use and reliable operation. The rugged metal body and quality rotor ensure increased resistance to solid particles and steady water flow, even under tough conditions.

This specific pump is equipped with an automatic float switch that stops the pump when the water level drops too low, thus preventing dry running and extending the motor's lifespan.

  • Pumping capacity: 25,000 liters/hour (25 m³/h)
  • Discharge height: 20 m
  • Protection type: IPX8
  • Material: Cast iron
  • Noise level: Automatic
  • Weight: 15 kg
  • Cable length: 8 m

The DDT Professional WQCD10-10-0.95F pump is an ideal solution for removing dirty water, offering an excellent combination of power, durability, and safety.

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Voltage
Single-Phase

Voltage

Single-Phase

Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 
Horsepower
4.13 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
3097.5 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Cable Length
10 m

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
Yes

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
20 m

Maximum Head Height: 20


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Maximum Output
25 m³/h

Maximum Output

The maximum output or flow of a submersible water pump, as defined by the manufacturers, is the maximum amount of water the pump can move under ideal conditions, usually with zero head (i.e., no lift resistance).
Pump Submersion Depth
10 m
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
No
Protection Certification
IPX8

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications
Questions

Questions

Do you have a question about the product?

1 user has this product and can help you

Ask for the product

Description & Specifications

The DDT Professional WQCD10-10-0.95F water pump is specialized equipment for the rapid removal of dirty and muddy water or water containing solid particles. It features a powerful 3100W motor and pumping capacity of up to 25,000 liters/hour, offering excellent performance in any situation, from draining basements and tanks to emptying cesspools and irrigating agricultural areas.

Made from durable and corrosion-resistant materials, the DDT pump is designed for long-term use and reliable operation. The rugged metal body and quality rotor ensure increased resistance to solid particles and steady water flow, even under tough conditions.

This specific pump is equipped with an automatic float switch that stops the pump when the water level drops too low, thus preventing dry running and extending the motor's lifespan.

  • Pumping capacity: 25,000 liters/hour (25 m³/h)
  • Discharge height: 20 m
  • Protection type: IPX8
  • Material: Cast iron
  • Noise level: Automatic
  • Weight: 15 kg
  • Cable length: 8 m

The DDT Professional WQCD10-10-0.95F pump is an ideal solution for removing dirty water, offering an excellent combination of power, durability, and safety.

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Voltage
Single-Phase

Voltage

Single-Phase

Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 
Horsepower
4.13 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
3097.5 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Cable Length
10 m

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
Yes

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
20 m

Maximum Head Height: 20


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Maximum Output
25 m³/h

Maximum Output

The maximum output or flow of a submersible water pump, as defined by the manufacturers, is the maximum amount of water the pump can move under ideal conditions, usually with zero head (i.e., no lift resistance).
Pump Submersion Depth
10 m
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
No
Protection Certification
IPX8

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.