The package contains, along with the monitor:
* a USB-C to USB-C cable, one end of which is angled at 180° so it can be hidden more aesthetically behind the device. It carries data/video and power together.
* a USB-C to USB-C power cable, along with a USB-A to USB-C adapter. It does not carry data/video.
* an HDMI to mini HDMI cable.
* a soft carrying case.
I connected the monitor to the laptop via the 1st USB port, so it can reach 180 Hz and I can adjust the brightness through the operating system (it syncs normally with the monitor's OSD).
The back of the device is flat, and there is a sturdy little stand that detaches magnetically from its slot and holds the monitor at the desired angle (the maximum opening is slightly less than 90 degrees).
In landscape orientation, the bottom edge, as well as the stand, has rubber to keep it from sliding out of place.
It could also be placed vertically on a stable surface, but in that position the angle cannot really be adjusted, and there are no anti-slip rubber pads for this orientation.
In my case, for my desk (because the PC tower is on top of the desk), I attached 22 30x10x2 mm magnets to the back of the monitor with double-sided tape so I can move/rotate it as I like on the side of the tower.
At home, since I use the laptop mostly in bed, I attached a RAM Mount-style arm to the base so I can move it either to the side or above the laptop screen.
Η συσκευασία περιέχει μαζί με την οθόνη:
* ένα καλώδιο usb-c σε usb-c, του οποίου το ένα άκρο είναι 180° για να κρύβεται καλύτερα αισθητικά πίσω από τη συσκευή. Μεταφέρει δεδομένα/εικόνα και ρεύμα μαζί.
* ένα καλώδιο usb-c σε usb-c ρεύματος, μαζί με αντάπτορα usb-a σε usb-c. Δεν μεταφέρει δεδομένα/εικόνα.
* ένα καλώδιο hdmi σε mini hdmi.
* μαλακή θήκη μεταφοράς.
Σύνδεσα την οθόνη μέσω του 1ου usb στο laptop, ώστε να πιάνει τα 180hz και να μπορώ να αλλάζω την φωτεινότητα μέσα από το λειτουργικό σύστημα (συγχρονίζει κανονικά με το OSD της οθόνης).
Η πίσω πλευρά της συσκευής είναι επίπεδη και υπάρχει στιβαρό ποδαράκι που ξεκουμπώνει μαγνητικά από τη θέση του και σταθεροποιεί την οθόνη στην επιθυμητή κλίση (το μέγιστο άνοιγμα είναι λίγο λιγότερο από 90 μοίρες).
Στον οριζόντιο προσανατολισμό, η κάτω πλευρά όπως και το ποδαράκι στήριξης έχουν λάστιχο για να μην γλυστράει από τη θέση της.
Θα μπορούσε να τοποθετηθεί και κάθετα σε σταθερή επιφάνεια αλλά έτσι η κλίση δεν παραμετροποιείται ουσιαστικά, ούτε υπάρχουν αντιολισθητικά λάστιχα σε αυτόν τον προσανατολισμό.
Στη περίπτωσή μου, για το γραφείο (επειδή ο πύργος του Η/Υ είναι πάνω στο έπιπλο) έχω κολλήσει με ταινία διπλής όψης 22 μαγνητάκια 30x10x2mm στην πίσω πλευρά της οθόνης για να την μετακινώ/περιστρέφω όπως με βολεύει πάνω στην πλαϊνή επιφάνεια του πύργου.
Στο σπίτι, επειδή χρησιμοποιώ το laptop πιο πολύ στο κρεβάτι, έβαλα πάνω στη βάση βραχίονα τύπου ram mount για να την μετακινώ είτε στο πλάι είτε πάνω από την οθόνη του laptop.
Be the first to leave a comment!