Capacity / Power: 2000 VA / 1200 W
Input Voltage: 170–280 VAC
Input Current: 9.5 A
Rated Input Frequency: 50/60 Hz
Power Factor: ≥0.6
Output Voltage: 230 VAC
Output Current: 9.2 A
Transfer Time: Typical 4 ms – 8 ms
-
Output Waveform:
AC Mode (Mains): Pure sine wave
Battery Mode: Simulated sine wave
Battery: Built-in, Lead-Acid (2 × 9 Ah)
Charging Current / Voltage: 1 A / 13.7 V per cell
Charging Time: 4–6 hours to 90%
-
Display Indication:
AC Mode: Shows Input & Output at 230 VAC
Battery Mode: Input 0 VAC, Output 230 VAC
Error Mode: Display 0
-
Audible Alerts (Alarm):
Battery mode: Beep every 10 seconds
Low battery: Beep every 1 second
Overload: Beep every 0.5 seconds
Battery replacement: Beep every 2 seconds
Error: Continuous beep
-
Protections & Overload Behavior:
Protection against overload, overcharge, and excessive battery discharge
AC overload (110%): Shutdown after 5 minutes
AC/Battery overload (120%): Immediate shutdown
Plugs & Sockets: European plug (1.2 m cable), 4 European output sockets (Schuko)
Cooling: Built-in fan
Construction & Dimensions: 374.5 × 138.4 × 166.5 mm, Plastic front panel + metal body, Black color
Weight: Net 12.2 kg / Gross 12.6 kg
Operating Conditions: Temperature 0 °C to +40 °C, Humidity 0%–90% (non-condensing)
Certifications: CE LVD & CE EMC
Capacity / Power: 2000 VA / 1200 W
Input Voltage: 170–280 VAC
Input Current: 9.5 A
Rated Input Frequency: 50/60 Hz
Power Factor: ≥0.6
Output Voltage: 230 VAC
Output Current: 9.2 A
Transfer Time: Typical 4 ms – 8 ms
-
Output Waveform:
AC Mode (Mains): Pure sine wave
Battery Mode: Simulated sine wave
Battery: Built-in, Lead-Acid (2 × 9 Ah)
Charging Current / Voltage: 1 A / 13.7 V per cell
Charging Time: 4–6 hours to 90%
-
Display Indication:
AC Mode: Shows Input & Output at 230 VAC
Battery Mode: Input 0 VAC, Output 230 VAC
Error Mode: Display 0
-
Audible Alerts (Alarm):
Battery mode: Beep every 10 seconds
Low battery: Beep every 1 second
Overload: Beep every 0.5 seconds
Battery replacement: Beep every 2 seconds
Error: Continuous beep
-
Protections & Overload Behavior:
Protection against overload, overcharge, and excessive battery discharge
AC overload (110%): Shutdown after 5 minutes
AC/Battery overload (120%): Immediate shutdown
Plugs & Sockets: European plug (1.2 m cable), 4 European output sockets (Schuko)
Cooling: Built-in fan
Construction & Dimensions: 374.5 × 138.4 × 166.5 mm, Plastic front panel + metal body, Black color
Weight: Net 12.2 kg / Gross 12.6 kg
Operating Conditions: Temperature 0 °C to +40 °C, Humidity 0%–90% (non-condensing)
Certifications: CE LVD & CE EMC
The Line-interactive UPS 2000VA/1200W is a powerful and comprehensive uninterruptible power supply solution, designed to protect computers, servers, and sensitive electronic equipment. It features 4 European sockets, an integrated voltage stabilization system (AVR) with an input range of 170–280 VAC, as well as a very fast transfer to battery mode in just 4–8 ms.
It is equipped with two 9Ah batteries that recharge to 90% in 4–6 hours, a digital status display, and an intelligent audible alert system for every operating condition. At the same time, it provides full electrical protection against overload, short circuit, and deep discharge, while its robust construction (metal body with a plastic front panel and active cooling) ensures maximum reliability and safety with CE certifications.
Dimensions
- Type
- (VI) Line-Interactive
- Power (VA)
- 2000 VA
- Power (Watt)
- 1200 W
- Size
- Tower
- Output Waveform
- Modified Sine Wave,Modified sinewave
- Noise Level
- -
- Display Screen
- Digital Display
Connectivity
- USB
- No
- AC outlets
- 4
- Plug Type
- Schuko
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.