Skroutz.cy

Leo Group LSWm 30XA Single-phase Pump Waste Water / Sewage 0.35hp
Submersible Water Pumps

Leo Group LSWm 30XA Single-phase Pump Waste Water / Sewage 0.35hp

Key features:

  • Power: 0.35 Hp
  • Operating voltage: Single-phase 220V
  • Maximum head height: 7 m
  • Impeller type: Vortex (for sewage)
  • Automatic float switch
  • Outlet nozzle: 1 1/2″
See full description

Top specs

  • Horsepower

    Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).

  • Voltage

    Single-Phase

    Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 

  • Power

    It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.

  • Manometric Height

    7

    The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

    • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
    • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
  • See all
The product is not available for shipping to the selected country.
Review the product
Product report

Description

Description

LEO SWLM 30A-M Submersible Wastewater Pump

The LEO SWLM 30A-M submersible sewage pump is a robust heavy-duty solution, specially designed for handling dirty water and sewage. Its construction combines the durability of stainless steel with a cast iron body, ensuring long-lasting performance even in demanding environments. It is equipped with a Vortex-type impeller, which allows solids to pass through without the risk of clogging, making it ideal for draining residential or commercial pits.

Single-phase 220V power

The pump operates on single-phase 220V power and includes an integrated float switch, which allows for automatic start and stop of its operation depending on the water level. Despite its power, it is recommended for occasional tasks in pits and not for continuous operation, such as irrigation or watering. Its design focuses on reliable drainage in cases where the safe removal of wastewater is essential.

Outlet nozzle 1 1/2"

With a power of 0.35 Hp and a 1 1/2″ outlet, the pump provides satisfactory performance for household use. Its maximum head reaches 7 meters, while its flow rate varies depending on the pumping height, offering approximately 2.0 cubic meters per hour at 7 meters height. It is a tool that provides confidence in flood management and waste handling, ensuring the smooth operation of low-height sewerage networks.

Features

  • Power: 0.35 Hp 
  • Operating voltage: Single-phase 220V 
  • Pump body: Stainless steel with cast iron base/body 
  • Impeller type: Vortex (for sewage) 
  • Equipment: Automatic float switch 
  • Discharge outlet: 1 1/2″ 
  • Maximum head height: 7 m 
  • Maximum flow rate: 2.0 m³/h at 7 m 
  • Application: Sewage pit drainage 
  • Protection: Heavy-duty construction

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Type
Waste Water / Sewage

Type

Waste Water / Sewage

Waste water / sewage pumps are used for pumping and transporting waste water, sewage, and other liquids containing solids or particles
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Voltage
Single-Phase

Voltage

Single-Phase

Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 
Horsepower
0.35 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
262.5 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
Yes

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Outlet Nozzle
1 1/2"

Outlet Nozzle

The outlet nozzle refers to the point or the external diameter of the pump from which the pumped water or liquid exits. It is an important feature for determining the connection of the pump with the piping system and affects the flow capacity of the liquid.
Vortex
Yes

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
7 m

Maximum Head Height: 7


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
Yes

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications
Questions

Questions

Do you have a question about the product?

1 user has this product and can help you

Ask for the product

Description & Specifications

LEO SWLM 30A-M Submersible Wastewater Pump

The LEO SWLM 30A-M submersible sewage pump is a robust heavy-duty solution, specially designed for handling dirty water and sewage. Its construction combines the durability of stainless steel with a cast iron body, ensuring long-lasting performance even in demanding environments. It is equipped with a Vortex-type impeller, which allows solids to pass through without the risk of clogging, making it ideal for draining residential or commercial pits.

Single-phase 220V power

The pump operates on single-phase 220V power and includes an integrated float switch, which allows for automatic start and stop of its operation depending on the water level. Despite its power, it is recommended for occasional tasks in pits and not for continuous operation, such as irrigation or watering. Its design focuses on reliable drainage in cases where the safe removal of wastewater is essential.

Outlet nozzle 1 1/2"

With a power of 0.35 Hp and a 1 1/2″ outlet, the pump provides satisfactory performance for household use. Its maximum head reaches 7 meters, while its flow rate varies depending on the pumping height, offering approximately 2.0 cubic meters per hour at 7 meters height. It is a tool that provides confidence in flood management and waste handling, ensuring the smooth operation of low-height sewerage networks.

Features

  • Power: 0.35 Hp 
  • Operating voltage: Single-phase 220V 
  • Pump body: Stainless steel with cast iron base/body 
  • Impeller type: Vortex (for sewage) 
  • Equipment: Automatic float switch 
  • Discharge outlet: 1 1/2″ 
  • Maximum head height: 7 m 
  • Maximum flow rate: 2.0 m³/h at 7 m 
  • Application: Sewage pit drainage 
  • Protection: Heavy-duty construction

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
Waste Water / Sewage

Type

Waste Water / Sewage

Waste water / sewage pumps are used for pumping and transporting waste water, sewage, and other liquids containing solids or particles
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Voltage
Single-Phase

Voltage

Single-Phase

Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 
Horsepower
0.35 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
262.5 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
Yes

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Outlet Nozzle
1 1/2"

Outlet Nozzle

The outlet nozzle refers to the point or the external diameter of the pump from which the pumped water or liquid exits. It is an important feature for determining the connection of the pump with the piping system and affects the flow capacity of the liquid.
Vortex
Yes

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
7 m

Maximum Head Height: 7


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
Yes

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Κέρδισε ένα κουπόνι 50€ για την επόμενη αγορά σου!
Κέρδισε ένα κουπόνι 50€ για την επόμενη αγορά σου!
Δες πώς εδώ