Skroutz.cy

Alpinestars SM3 Jettson Grey Gloss Motorcycle Helmet Motocross DOT / ECE 22.06 1430gr
Motorcycle Helmets

Alpinestars SM3 Jettson Grey Gloss Motorcycle Helmet Motocross DOT / ECE 22.06 1430gr Code: 01109231

This motocross helmet has been specially designed for the demands of extreme dirt riding, making it ideal for motocross and enduro races. It features a long chin guard and a large visor that provide...

This motocross helmet has been specially designed for the demands of extreme dirt riding, making it ideal for motocross and enduro races. It features a long chin guard and a large visor that provide protection from the sun and branches, while its lightweight design ensures comfort during use. Please note that it is not suitable for urban riding or highway...

See full description See full description

  • Type

    Motocross

    Motocross helmets are specially designed for extreme off-road riding for motocross or enduro races. They have a very long chin and a large visor for protection from the sun or branches.

    They are usually lighter compared to full-face or flip-up helmets to be comfortable for the rider. They are not recommended for riding in the city or on highways.

  • Material

    Thermoplastic

    This is a plastic material mainly used in more affordable and entry-level helmets.

    Thermoplastic shells, such as Polycarbonate or ABS, offer basic protection through deformation upon impact, with greater weight and lower production cost compared to composite materials.

  • Certification

    Certification refers to the official inspection that confirms the helmet meets specific safety standards as defined by international organizations (e.g., ECE, DOT). It is an indication that the helmet has been tested and approved for its ability to protect in real collision conditions.

    DOT

    Safety standard applicable in the United States. Includes tests for energy absorption, shell strength, and strap retention. It is less stringent than European standards but remains internationally recognized.

    ECE 22.06

    New European-type safety specification certification "ECE 22.06", which ensures that the helmet is tested at 18 impact check points instead of 6 as was previously the case. It is now considered the most modern and comprehensive standard for helmet safety in Europe.

  • Pinlock (Anti-fog Film)

    Not Supported

    It is not compatible with the Pinlock system, so it cannot be installed. In this case, the helmet does not have the fittings for adding the Pinlock inner visor, which means there is no special protection against fogging or misting of the visor.
  • Color Finish Glossy
  • See all

Size

Alpinestars size guide
Alpinestars size guide

Size

Alpinestars size guide
International
255 99 €
256 Coins 256 Coins
Delivery Tue, 14 Jul - Mon, 20 Jul
2,00 € shipping cost
Delivery Wed, 22 Jul - Tue, 28 Jul
Free shipping cost
Do you want it with Free shipping?
Sent from Greece
From MotoHub 4.9 (7)
4.9 (7 reviews)
Greece
See Rider Equipment on the page of MotoHub
Review the product
Product report

Description

Description

This motocross helmet has been specially designed for the demands of extreme dirt riding, making it ideal for motocross and enduro races. It features a long chin guard and a large visor that provide protection from the sun and branches, while its lightweight design ensures comfort during use. Please note that it is not suitable for urban riding or highway use.

The helmet is made from thermoplastic material, which offers basic impact protection at a lower weight and cost compared to other composite materials. An important detail is that it does not support the Pinlock system, so anti-fog visor inserts cannot be installed.

The interior lining is removable and washable, making maintenance and care of the helmet easier.

The locking mechanism is via double D-rings, providing secure fastening, although it requires a little time to secure properly. The helmet meets DOT and ECE 22.06 certifications, ensuring it has been tested and approved according to international safety standards.

  • Type: Motocross
  • Color: Gray
  • Material: Thermoplastic
  • Removable and washable interior lining
  • Closure: Double D-ring
  • Certification: DOT, ECE 22.06
  • Without Bluetooth

SkuDescription|Brand

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Number
01109231

Dimensions

Type
Motocross

Type

Motocross

Motocross helmets are specially designed for extreme off-road riding for motocross or enduro races. They have a very long chin and a large visor for protection from the sun or branches.

They are usually lighter compared to full-face or flip-up helmets to be comfortable for the rider. They are not recommended for riding in the city or on highways.
Weight (+/-50 gr)
1430 gr

Weight (+/-50 gr)

Most helmets weigh around 1500gr and some can reach up to 1800gr. Additionally, the material is also an important factor for the weight of the helmet, with carbon helmets being considered lighter.
Colour
Grey
Color Finish
Glossy
Material
Thermoplastic

Material

Thermoplastic

This is a plastic material mainly used in more affordable and entry-level helmets.

Thermoplastic shells, such as Polycarbonate or ABS, offer basic protection through deformation upon impact, with greater weight and lower production cost compared to composite materials.
Clasp
Double D Ring

Clasp

Double D Ring

The helmet is fastened with 2 metal rings that the strap passes through between them. 2. It is a mechanism that securely holds the helmet without coming undone. 3. It is not recommended for use with helmets that frequently come off as the fastening requires time. It does not easily break or malfunction compared to the microlock fastening.
Certification
DOT, ECE 22.06

Certification

Certification refers to the official inspection that confirms the helmet meets specific safety standards as defined by international organizations (e.g., ECE, DOT). It is an indication that the helmet has been tested and approved for its ability to protect in real collision conditions.

DOT

Safety standard applicable in the United States. Includes tests for energy absorption, shell strength, and strap retention. It is less stringent than European standards but remains internationally recognized.

ECE 22.06

New European-type safety specification certification "ECE 22.06", which ensures that the helmet is tested at 18 impact check points instead of 6 as was previously the case. It is now considered the most modern and comprehensive standard for helmet safety in Europe.
Pinlock (Anti-fog Film)
Not Supported

Pinlock (Anti-fog Film)

Not Supported

It is not compatible with the Pinlock system, so it cannot be installed. In this case, the helmet does not have the fittings for adding the Pinlock inner visor, which means there is no special protection against fogging or misting of the visor.

Extra Features

Removable / Washable Interior
Yes

Removable / Washable Interior

The helmet's interior lining can be removed and washed.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications
Questions

Questions

Do you have a question about the product?

Those users who have this product can help you

Ask for the product

Description & Specifications

This motocross helmet has been specially designed for the demands of extreme dirt riding, making it ideal for motocross and enduro races. It features a long chin guard and a large visor that provide protection from the sun and branches, while its lightweight design ensures comfort during use. Please note that it is not suitable for urban riding or highway use.

The helmet is made from thermoplastic material, which offers basic impact protection at a lower weight and cost compared to other composite materials. An important detail is that it does not support the Pinlock system, so anti-fog visor inserts cannot be installed.

The interior lining is removable and washable, making maintenance and care of the helmet easier.

The locking mechanism is via double D-rings, providing secure fastening, although it requires a little time to secure properly. The helmet meets DOT and ECE 22.06 certifications, ensuring it has been tested and approved according to international safety standards.

  • Type: Motocross
  • Color: Gray
  • Material: Thermoplastic
  • Removable and washable interior lining
  • Closure: Double D-ring
  • Certification: DOT, ECE 22.06
  • Without Bluetooth

SkuDescription|Brand

Manufacturer Details

Warnings & Safety Information
Product Number
01109231

Dimensions

Type
Motocross

Type

Motocross

Motocross helmets are specially designed for extreme off-road riding for motocross or enduro races. They have a very long chin and a large visor for protection from the sun or branches.

They are usually lighter compared to full-face or flip-up helmets to be comfortable for the rider. They are not recommended for riding in the city or on highways.
Weight (+/-50 gr)
1430 gr

Weight (+/-50 gr)

Most helmets weigh around 1500gr and some can reach up to 1800gr. Additionally, the material is also an important factor for the weight of the helmet, with carbon helmets being considered lighter.
Colour
Grey
Color Finish
Glossy
Material
Thermoplastic

Material

Thermoplastic

This is a plastic material mainly used in more affordable and entry-level helmets.

Thermoplastic shells, such as Polycarbonate or ABS, offer basic protection through deformation upon impact, with greater weight and lower production cost compared to composite materials.
Clasp
Double D Ring

Clasp

Double D Ring

The helmet is fastened with 2 metal rings that the strap passes through between them. 2. It is a mechanism that securely holds the helmet without coming undone. 3. It is not recommended for use with helmets that frequently come off as the fastening requires time. It does not easily break or malfunction compared to the microlock fastening.
Certification
DOT, ECE 22.06

Certification

Certification refers to the official inspection that confirms the helmet meets specific safety standards as defined by international organizations (e.g., ECE, DOT). It is an indication that the helmet has been tested and approved for its ability to protect in real collision conditions.

DOT

Safety standard applicable in the United States. Includes tests for energy absorption, shell strength, and strap retention. It is less stringent than European standards but remains internationally recognized.

ECE 22.06

New European-type safety specification certification "ECE 22.06", which ensures that the helmet is tested at 18 impact check points instead of 6 as was previously the case. It is now considered the most modern and comprehensive standard for helmet safety in Europe.
Pinlock (Anti-fog Film)
Not Supported

Pinlock (Anti-fog Film)

Not Supported

It is not compatible with the Pinlock system, so it cannot be installed. In this case, the helmet does not have the fittings for adding the Pinlock inner visor, which means there is no special protection against fogging or misting of the visor.

Extra Features

Removable / Washable Interior
Yes

Removable / Washable Interior

The helmet's interior lining can be removed and washed.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

255,99 €
2,00 €  7,00 €  

Reduced Shipping

For purchases from Skroutz a discount is applied for this particular product.

Learn more