Skroutz.cy

Neo Tools Pump Waste Water / Sewage 0.53hp 04-745
Submersible Water Pumps

Neo Tools Pump Waste Water / Sewage 0.53hp 04-745

Key features:

  • Water flow: 8,000 l/h
  • Cable length: 10 m
  • Maximum submersion depth: 5 m
  • Maximum water lifting height: 7 m
See full description

  • Horsepower

    Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).

  • Power

    It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.

  • Manometric Height

    7

    The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

    • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
    • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
  • See all
44 00 €
Delivery Wed, 15 Jul - Fri, 17 Jul
5,00 € shipping cost
Do you want it with Free shipping to Skroutz Point?
Sent from Greece
From Sxetakis 4.9 (4)
4.9 (4 reviews)
Greece
4 pieces
See Water Pumps on the page of Sxetakis
What if it breaks?

You have at least a 2-year warranty. Contact us by phone and we will immediately take care of the repair, replacement or refund of your money, completely free of charge.

What if I change my mind?

No problem, as long as it's within 14 days. We'll come pick it up or you can choose the Skroutz Point that suits you, completely free for up to 2 times per year, and we'll refund your money. Get Skroutz Plus to enjoy unlimited free returns.

Review the product
Product report

Description

Description

At a glance

  • A practical tool for pumping water from buildings or basements, as well as for transferring water from water sources (e.g. wells) to the point of use. 
  • It has a power of 400 W and a maximum flow rate of up to 8,000 l/h. 
  • The maximum submersion depth of the pump is 5 m and the maximum water lifting height reaches 7 m. 
  • After pumping, it leaves a residual water level of 30 mm, while the maximum allowable dirt particle size should not exceed 25 mm.
  • It is made of aluminum (motor body) and glass fiber reinforced nylon (main casing). 
  • The maximum supported water temperature is 35°C. 
  • It features a ceramic shaft seal and a 10-meter long rubber power cable. 
  • It supports outlet diameters of ∅25, ∅32, 1", 1½".

Features & Specifications

  • Water flow: 8,000 l/h
  • Pump type: for dirty water
  • Cable length: 10 m
  • Maximum submersion depth: 5 m
  • Protection rating: IPX8
  • Housing material: main housing made of glass fiber reinforced nylon, motor body made of nylon + aluminum
  • Maximum particle size: 25 mm
  • Power: 400 W
  • Connection nozzle diameter: ∅25, ∅32, 1", 1½"
  • Maximum water lifting height: 7 m
  • Power supply voltage: 230V~50Hz

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Type
Waste Water / Sewage

Type

Waste Water / Sewage

Waste water / sewage pumps are used for pumping and transporting waste water, sewage, and other liquids containing solids or particles
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Horsepower
0.53 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
397.5 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Cable Length
10 m

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
No

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Outlet Nozzle
1 1/2", 1"

Outlet Nozzle

The outlet nozzle refers to the point or the external diameter of the pump from which the pumped water or liquid exits. It is an important feature for determining the connection of the pump with the piping system and affects the flow capacity of the liquid.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
7 m

Maximum Head Height: 7


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Maximum Output
8 m³/h

Maximum Output

The maximum output or flow of a submersible water pump, as defined by the manufacturers, is the maximum amount of water the pump can move under ideal conditions, usually with zero head (i.e., no lift resistance).
Pump Submersion Depth
5 m
Maximum Particle Size
25 mm

Maximum Particle Size

Specifies the largest size of solid particles (such as sand, stones, or other impurities) that the device can pump without clogging or being damaged.
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
No
Protection Certification
IPX8

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications
Questions

Questions

Do you have a question about the product?

Those users who have this product can help you

Ask for the product

Description & Specifications

At a glance

  • A practical tool for pumping water from buildings or basements, as well as for transferring water from water sources (e.g. wells) to the point of use. 
  • It has a power of 400 W and a maximum flow rate of up to 8,000 l/h. 
  • The maximum submersion depth of the pump is 5 m and the maximum water lifting height reaches 7 m. 
  • After pumping, it leaves a residual water level of 30 mm, while the maximum allowable dirt particle size should not exceed 25 mm.
  • It is made of aluminum (motor body) and glass fiber reinforced nylon (main casing). 
  • The maximum supported water temperature is 35°C. 
  • It features a ceramic shaft seal and a 10-meter long rubber power cable. 
  • It supports outlet diameters of ∅25, ∅32, 1", 1½".

Features & Specifications

  • Water flow: 8,000 l/h
  • Pump type: for dirty water
  • Cable length: 10 m
  • Maximum submersion depth: 5 m
  • Protection rating: IPX8
  • Housing material: main housing made of glass fiber reinforced nylon, motor body made of nylon + aluminum
  • Maximum particle size: 25 mm
  • Power: 400 W
  • Connection nozzle diameter: ∅25, ∅32, 1", 1½"
  • Maximum water lifting height: 7 m
  • Power supply voltage: 230V~50Hz

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
Waste Water / Sewage

Type

Waste Water / Sewage

Waste water / sewage pumps are used for pumping and transporting waste water, sewage, and other liquids containing solids or particles
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Horsepower
0.53 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
397.5 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Cable Length
10 m

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
No

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Outlet Nozzle
1 1/2", 1"

Outlet Nozzle

The outlet nozzle refers to the point or the external diameter of the pump from which the pumped water or liquid exits. It is an important feature for determining the connection of the pump with the piping system and affects the flow capacity of the liquid.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
7 m

Maximum Head Height: 7


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Maximum Output
8 m³/h

Maximum Output

The maximum output or flow of a submersible water pump, as defined by the manufacturers, is the maximum amount of water the pump can move under ideal conditions, usually with zero head (i.e., no lift resistance).
Pump Submersion Depth
5 m
Maximum Particle Size
25 mm

Maximum Particle Size

Specifies the largest size of solid particles (such as sand, stones, or other impurities) that the device can pump without clogging or being damaged.
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
No
Protection Certification
IPX8

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

44,00 €
Free to a Skroutz Point
or   5,00 €   shipping cost