The application process of spray paints includes the following steps:

• Sand the surface with sandpaper so that it is clean, dry, and free of grease.
• Protect the surrounding area from spray mist.
• Apply primer.
• Shake the container for 2 minutes.
• Spray a test to check the shade, from a distance of 25-30 cm.
• Apply several thin layers.
• Hardening occurs after 2 hours.
• After use, turn the can upside down and spray for a few seconds.

Warnings:

• Hazard: Dangerous ingredients such as Acetone, ethyl acetate, n-butyl acetate.
• Extremely flammable aerosol. Pressurized container.
• Causes serious eye irritation.
• May cause drowsiness or dizziness.

Precautions:

• If medical advice is needed, have the container or label at hand.
• Keep out of reach of children.
• Keep away from heat, sparks, and open flame.
• Do not smoke during use.
• Do not pierce or burn the container even after use.
• Do not inhale vapors.
• Protect from sunlight and do not expose to temperatures exceeding 50°C.
• Dispose of contents according to local regulations.

Note: Prolonged exposure may cause skin dryness or cracking.