ERLAC RUST CONVERTER – Rust converter for metal surfaces.
Water-based primer that chemically reacts with rust, transforms it into a stable black compound, and reduces the need for sanding. Creates a protective layer against further oxidation, compatible with subsequent metal coatings.
- Chemical conversion of rust into an inert compound
- Protective film that inhibits new oxidation
- Ready to use – dilute only if required
- Easy application by spray, brush, or roller
- Fast drying deep 1–2 hours
- Compatible with anti-rust/finishing paints
Application surfaces:
- Metal surfaces (railings, doors, machinery, equipment)
- Reinforcement bars before repainting/protection
Where to use:
- Preparation of metals before anti-corrosive or finishing systems
- Maintenance of rusted surfaces with minimal sanding
- Restoration works in industrial and residential areas
Coverage: 6–8 m²/L per coat. Recommended application: 1 coat; 2 coats required on new surfaces for full protection.
Application method: Air spray gun, brush, roller.
Thinning: With water, if required.
Tool cleaning: With water immediately after use.
Drying time at 23°C: Touch dry — · Fully 1–2 hours (deep drying) · Recoating ~24 hours.
Packaging: 0.75 L.
Country of origin: Greece.
Specifications
- Type
- Rust Converter
- Colour
- Orange
- Acrilyc
- No
Quantity
- Volume
- 1 lt
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.