Skroutz.cy

Einhell GC-DP 7035 N ECO PLUS Pump Waste Water / Sewage 0.93hp 4170765
Submersible Water Pumps

Einhell GC-DP 7035 N ECO PLUS Pump Waste Water / Sewage 0.93hp 4170765

Key features:

  • Power: 700W
  • Maximum delivery height: 8 m
  • Maximum submersion depth: 7 m
  • Maximum delivery pressure: 0.8 bar
  • Maximum delivery rate: 19000 l/h
See full description

  • Horsepower

    Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).

  • Power

    It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.

  • Manometric Height

    8

    The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

    • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
    • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
  • See all

User Manual

87 66 €
88 Coins 88 Coins
Delivery Wed, 22 Jul - Tue, 28 Jul
9,00 € to a Skroutz Point or 10,00 € to an address
Do you want it with 4,00 € shipping to Skroutz Point?
Sent from Greece
From Karagianni 5.0 (10)
5.0 (10 reviews)
Greece
20+ pieces
See Water Pumps on the page of Karagianni
What if it breaks?

You have at least a 2-year warranty. Contact us by phone and we will immediately take care of the repair, replacement or refund of your money, completely free of charge.

What if I change my mind?

No problem, as long as it's within 14 days. We'll come pick it up or you can choose the Skroutz Point that suits you, completely free for up to 2 times per year, and we'll refund your money. Get Skroutz Plus to enjoy unlimited free returns.

Review the product
Product report

Description

Description

Capabilities

The Einhell GC-DP 7035 N ECO PLUS dirty water pump is a reliable tool for the efficient drainage of ponds, construction pits, basements, or for the utilization of rainwater. With a power of 700 watts, the pump provides a flow rate of 19,000 liters per hour. The maximum delivery height is 8 meters and the maximum submersion depth is 7 meters. The pump is designed for dirt particles with a diameter of up to 35 mm. Thanks to ECO PLUS technology, the pump achieves higher flow performance with reduced energy consumption. Its infinitely adjustable float switch allows for continuous operation or specific activation and deactivation levels. 

ECO PLUS Power

The Einhell GC-DP 7035 N ECO PLUS dirty water pump features innovative ECO PLUS technology, which allows it to pump more water using less energy. This means that large amounts of water can be pumped from wells, tanks, ponds, or excavation pits in a short period of time in an environmentally friendly and energy-efficient way. Greater pumping capacity with lower energy consumption? It's easy with Einhell!

Float switch

The external float switch allows variable adjustment of the suction height and automatically switches off the pump.

Stainless steel casing

The housing of the Einhell GC-DP 7035 N ECO PLUS dirty water pump is made of high-quality, durable stainless steel.

Features

  • Maximum delivery height: 8 m.
  • Maximum delivery pressure: 0.8 bar
  • Maximum delivery rate: 19,000 liters/hour
  • Maximum foreign body size: 35 millimeters
  • Maximum submersion depth: 7 m.
  • Maximum water temperature: 35 °C
  • Minimum pump start water level: 80 millimeters
  • Power: 700 W
  • Power cable length: 10 m.
  • Pressure connection type: 47.8 mm (G11/2 IG)
  • Shallow suction up to 40 millimeters

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Guides

User Manual

Dimensions

Type
Waste Water / Sewage

Type

Waste Water / Sewage

Waste water / sewage pumps are used for pumping and transporting waste water, sewage, and other liquids containing solids or particles
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Horsepower
0.93 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
697.5 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
No

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Outlet Nozzle
1 1/2"

Outlet Nozzle

The outlet nozzle refers to the point or the external diameter of the pump from which the pumped water or liquid exits. It is an important feature for determining the connection of the pump with the piping system and affects the flow capacity of the liquid.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
8 m

Maximum Head Height: 8


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Maximum Output
19 m³/h

Maximum Output

The maximum output or flow of a submersible water pump, as defined by the manufacturers, is the maximum amount of water the pump can move under ideal conditions, usually with zero head (i.e., no lift resistance).
Pump Submersion Depth
7 m
Maximum Particle Size
35 mm

Maximum Particle Size

Specifies the largest size of solid particles (such as sand, stones, or other impurities) that the device can pump without clogging or being damaged.
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications
Questions

Questions

Do you have a question about the product?

3 users have this product and can help you

Ask for the product

Description & Specifications

Capabilities

The Einhell GC-DP 7035 N ECO PLUS dirty water pump is a reliable tool for the efficient drainage of ponds, construction pits, basements, or for the utilization of rainwater. With a power of 700 watts, the pump provides a flow rate of 19,000 liters per hour. The maximum delivery height is 8 meters and the maximum submersion depth is 7 meters. The pump is designed for dirt particles with a diameter of up to 35 mm. Thanks to ECO PLUS technology, the pump achieves higher flow performance with reduced energy consumption. Its infinitely adjustable float switch allows for continuous operation or specific activation and deactivation levels. 

ECO PLUS Power

The Einhell GC-DP 7035 N ECO PLUS dirty water pump features innovative ECO PLUS technology, which allows it to pump more water using less energy. This means that large amounts of water can be pumped from wells, tanks, ponds, or excavation pits in a short period of time in an environmentally friendly and energy-efficient way. Greater pumping capacity with lower energy consumption? It's easy with Einhell!

Float switch

The external float switch allows variable adjustment of the suction height and automatically switches off the pump.

Stainless steel casing

The housing of the Einhell GC-DP 7035 N ECO PLUS dirty water pump is made of high-quality, durable stainless steel.

Features

  • Maximum delivery height: 8 m.
  • Maximum delivery pressure: 0.8 bar
  • Maximum delivery rate: 19,000 liters/hour
  • Maximum foreign body size: 35 millimeters
  • Maximum submersion depth: 7 m.
  • Maximum water temperature: 35 °C
  • Minimum pump start water level: 80 millimeters
  • Power: 700 W
  • Power cable length: 10 m.
  • Pressure connection type: 47.8 mm (G11/2 IG)
  • Shallow suction up to 40 millimeters

Manufacturer

Manufacturer Details

Warnings & Safety Information

Product Guides

User Manual

Dimensions

Type
Waste Water / Sewage

Type

Waste Water / Sewage

Waste water / sewage pumps are used for pumping and transporting waste water, sewage, and other liquids containing solids or particles
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Horsepower
0.93 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
697.5 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
No

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Outlet Nozzle
1 1/2"

Outlet Nozzle

The outlet nozzle refers to the point or the external diameter of the pump from which the pumped water or liquid exits. It is an important feature for determining the connection of the pump with the piping system and affects the flow capacity of the liquid.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
8 m

Maximum Head Height: 8


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Maximum Output
19 m³/h

Maximum Output

The maximum output or flow of a submersible water pump, as defined by the manufacturers, is the maximum amount of water the pump can move under ideal conditions, usually with zero head (i.e., no lift resistance).
Pump Submersion Depth
7 m
Maximum Particle Size
35 mm

Maximum Particle Size

Specifies the largest size of solid particles (such as sand, stones, or other impurities) that the device can pump without clogging or being damaged.
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

87,66 €
9,00 € to a Skroutz Point
or   10,00 €   shipping cost