Skroutz.cy

Soundigital Xp400.4 Car Audio Amplifier Class D Four Channels Power 4x 100wrms 2ohm
Car Audio Amplifiers

Soundigital Xp400.4 Car Audio Amplifier Class D Four Channels Power 4x 100wrms 2ohm Code: SD400.4XP

Amplifier Adjustment Technical Specifications

  • Required equipment: Digital AC Voltmeter.
  • Sine wave tone 60Hz recorded at 0dB.
  • Fully reduce the gain control.
  • Disconnect the output cables from the...

Amplifier Adjustment Technical Specifications

  • Required equipment: Digital AC Voltmeter.
  • Sine wave tone 60Hz recorded at 0dB.
  • Fully reduce the gain control.
  • Disconnect the output cables from the amplifier outputs.
  • Turn off all processing (bass, treble, volume, equalizer, etc.).
  • Set the audio device's volume to 3/4 of full volume.
  • Set the audio device's fader...
See full description See full description
What if it breaks?

You're covered by the statutory 2-year warranty. Contact us and we'll handle the entire process with the store, ensuring your issue is resolved with prompt support through a repair, replacement, or refund.

What if I change my mind?

No problem, as long as it's within 14 days. We'll come pick it up or you can choose the Skroutz Point that suits you, completely free for up to 2 times per year, and we'll refund your money. Get Skroutz Plus to enjoy unlimited free returns.

Review the product
Product report

Description

Description

Amplifier Adjustment Technical Specifications

  • Required equipment: Digital AC Voltmeter.
  • Sine wave tone 60Hz recorded at 0dB.
  • Fully reduce the gain control.
  • Disconnect the output cables from the amplifier outputs.
  • Turn off all processing (bass, treble, volume, equalizer, etc.).
  • Set the audio device's volume to 3/4 of full volume.
  • Set the audio device's fader control to the middle position.
  • Adjust the variable crossover "LOW" to 500Hz and "HIGH" to 3Hz.
  • Use a 60Hz sine wave.
  • Increase the gain control until the "CLIP" LED starts blinking.
  • Reset the gain to the limit where the "CLIP" LED stops blinking and remains off.
  • Once you have set the amplifier to the correct output voltage, turn off the power source and reconnect the speaker(s).

Product Features XP 400.4

  • Power @ 4Ω: 4 x 66 WRMS
  • Power @ 2Ω: 4 x 100 WRMS
  • Operating Voltage: 9V – 16V
  • Current Draw (Music): 17 A
  • Current Draw (Max): 34 A
  • Recommended Fuse (Music): 20 A
  • Frequency Response (-3dB): 5Hz – 36kHz
  • SNR: 96dB
  • Crossover HPF: 45Hz – 850Hz
  • Crossover LPF: 45Hz – 850Hz
  • THD + N (10% Rated Power): 0.1%
  • Recommended Battery: 40aH
  • Power Cable: 7AWG
  • Speaker Cable: 15AWG
  • Product Dimensions: 11.9 x 11.3 x 5.0 cm

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Number
SD400.4XP
Number of Channels
4 Channels

Number of Channels

4 Channels
The 4-channel amplifiers are intended for 4-speaker systems.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications
Questions

Questions

Do you have a question about the product?

Those users who have this product can help you

Ask for the product

Description & Specifications

Amplifier Adjustment Technical Specifications

  • Required equipment: Digital AC Voltmeter.
  • Sine wave tone 60Hz recorded at 0dB.
  • Fully reduce the gain control.
  • Disconnect the output cables from the amplifier outputs.
  • Turn off all processing (bass, treble, volume, equalizer, etc.).
  • Set the audio device's volume to 3/4 of full volume.
  • Set the audio device's fader control to the middle position.
  • Adjust the variable crossover "LOW" to 500Hz and "HIGH" to 3Hz.
  • Use a 60Hz sine wave.
  • Increase the gain control until the "CLIP" LED starts blinking.
  • Reset the gain to the limit where the "CLIP" LED stops blinking and remains off.
  • Once you have set the amplifier to the correct output voltage, turn off the power source and reconnect the speaker(s).

Product Features XP 400.4

  • Power @ 4Ω: 4 x 66 WRMS
  • Power @ 2Ω: 4 x 100 WRMS
  • Operating Voltage: 9V – 16V
  • Current Draw (Music): 17 A
  • Current Draw (Max): 34 A
  • Recommended Fuse (Music): 20 A
  • Frequency Response (-3dB): 5Hz – 36kHz
  • SNR: 96dB
  • Crossover HPF: 45Hz – 850Hz
  • Crossover LPF: 45Hz – 850Hz
  • THD + N (10% Rated Power): 0.1%
  • Recommended Battery: 40aH
  • Power Cable: 7AWG
  • Speaker Cable: 15AWG
  • Product Dimensions: 11.9 x 11.3 x 5.0 cm

Manufacturer

Manufacturer Details

Warnings & Safety Information
Product Number
SD400.4XP
Number of Channels
4 Channels

Number of Channels

4 Channels
The 4-channel amplifiers are intended for 4-speaker systems.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

240,00 €
Free   shipping cost