Skroutz.cy

Pull-In MX Master Motorcycle Helmet Motocross ECE 22.06 1350gr
Motorcycle Helmets

Pull-In MX Master Motorcycle Helmet Motocross ECE 22.06 1350gr Code: 255-9002200-0001

This motocross helmet is designed for extreme off-road riding, such as motocross or enduro races. Its construction offers necessary protection with the long chin guard and large visor, which shield...

This motocross helmet is designed for extreme off-road riding, such as motocross or enduro races. Its construction offers necessary protection with the long chin guard and large visor, which shield from the sun and branches. It is lightweight, making it comfortable for the rider, although it is not recommended for urban riding or highway use.

Here is an...

See full description See full description

  • Type

    Motocross

    Motocross helmets are specially designed for extreme off-road riding for motocross or enduro races. They have a very long chin and a large visor for protection from the sun or branches.

    They are usually lighter compared to full-face or flip-up helmets to be comfortable for the rider. They are not recommended for riding in the city or on highways.

  • Material

    Thermoplastic

    This is a plastic material mainly used in more affordable and entry-level helmets.

    Thermoplastic shells, such as Polycarbonate or ABS, offer basic protection through deformation upon impact, with greater weight and lower production cost compared to composite materials.

  • Certification

    Certification refers to the official inspection that confirms the helmet meets specific safety standards as defined by international organizations (e.g., ECE, DOT). It is an indication that the helmet has been tested and approved for its ability to protect in real collision conditions.

    ECE 22.06

    New European-type safety specification certification "ECE 22.06", which ensures that the helmet is tested at 18 impact check points instead of 6 as was previously the case. It is now considered the most modern and comprehensive standard for helmet safety in Europe.

  • Pinlock (Anti-fog Film)

    Not Supported

    It is not compatible with the Pinlock system, so it cannot be installed. In this case, the helmet does not have the fittings for adding the Pinlock inner visor, which means there is no special protection against fogging or misting of the visor.
  • See all

Size

Size

International
119 95 €
120 Coins 120 Coins
Delivery Thu, 09 Jul - Mon, 13 Jul
6,00 € to a Skroutz Point or 7,00 € to an address
Do you want it with 1,00 € shipping to Skroutz Point?
Sent from Greece
From Motokinisi 4.7 (29)
4.7 (29 reviews)
Greece
See Rider Equipment on the page of Motokinisi
Review the product
Product report

Description

Description

This motocross helmet is designed for extreme off-road riding, such as motocross or enduro races. Its construction offers necessary protection with the long chin guard and large visor, which shield from the sun and branches. It is lightweight, making it comfortable for the rider, although it is not recommended for urban riding or highway use.

Here is an overview of its features:

  • Material: Made from thermoplastic, it provides basic protection through deformation upon impact.
  • Certification: Meets ECE 22.06 safety standards, ensuring it has been tested at 18 impact checkpoints.
  • Removable/Washable Interior: The inner lining can be removed and washed for easier maintenance.
  • Buckle: Features double metal rings, offering a secure and stable fit.
  • Pinlock: Not supported, which means you cannot add an internal Pinlock visor for extra anti-fog protection.
  • Bluetooth: No Bluetooth capability.

Choosing a helmet is crucial for your safety during races and the right choice can make a difference. This helmet is a reliable option for motocross enthusiasts.

SkuDescription|Brand

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Number
255-9002200-0001

Dimensions

Type
Motocross

Type

Motocross

Motocross helmets are specially designed for extreme off-road riding for motocross or enduro races. They have a very long chin and a large visor for protection from the sun or branches.

They are usually lighter compared to full-face or flip-up helmets to be comfortable for the rider. They are not recommended for riding in the city or on highways.
Weight (+/-50 gr)
1350 gr

Weight (+/-50 gr)

Most helmets weigh around 1500gr and some can reach up to 1800gr. Additionally, the material is also an important factor for the weight of the helmet, with carbon helmets being considered lighter.
Colour
Red
Material
Thermoplastic

Material

Thermoplastic

This is a plastic material mainly used in more affordable and entry-level helmets.

Thermoplastic shells, such as Polycarbonate or ABS, offer basic protection through deformation upon impact, with greater weight and lower production cost compared to composite materials.
Clasp
Double D Ring

Clasp

Double D Ring

The helmet is fastened with 2 metal rings that the strap passes through between them. 2. It is a mechanism that securely holds the helmet without coming undone. 3. It is not recommended for use with helmets that frequently come off as the fastening requires time. It does not easily break or malfunction compared to the microlock fastening.
Certification
ECE 22.06

Certification

Certification refers to the official inspection that confirms the helmet meets specific safety standards as defined by international organizations (e.g., ECE, DOT). It is an indication that the helmet has been tested and approved for its ability to protect in real collision conditions.

ECE 22.06

New European-type safety specification certification "ECE 22.06", which ensures that the helmet is tested at 18 impact check points instead of 6 as was previously the case. It is now considered the most modern and comprehensive standard for helmet safety in Europe.
Pinlock (Anti-fog Film)
Not Supported

Pinlock (Anti-fog Film)

Not Supported

It is not compatible with the Pinlock system, so it cannot be installed. In this case, the helmet does not have the fittings for adding the Pinlock inner visor, which means there is no special protection against fogging or misting of the visor.

Extra Features

Removable / Washable Interior
Yes

Removable / Washable Interior

The helmet's interior lining can be removed and washed.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications
Questions

Questions

Do you have a question about the product?

Those users who have this product can help you

Ask for the product

Description & Specifications

This motocross helmet is designed for extreme off-road riding, such as motocross or enduro races. Its construction offers necessary protection with the long chin guard and large visor, which shield from the sun and branches. It is lightweight, making it comfortable for the rider, although it is not recommended for urban riding or highway use.

Here is an overview of its features:

  • Material: Made from thermoplastic, it provides basic protection through deformation upon impact.
  • Certification: Meets ECE 22.06 safety standards, ensuring it has been tested at 18 impact checkpoints.
  • Removable/Washable Interior: The inner lining can be removed and washed for easier maintenance.
  • Buckle: Features double metal rings, offering a secure and stable fit.
  • Pinlock: Not supported, which means you cannot add an internal Pinlock visor for extra anti-fog protection.
  • Bluetooth: No Bluetooth capability.

Choosing a helmet is crucial for your safety during races and the right choice can make a difference. This helmet is a reliable option for motocross enthusiasts.

SkuDescription|Brand

Manufacturer Details

Warnings & Safety Information
Product Number
255-9002200-0001

Dimensions

Type
Motocross

Type

Motocross

Motocross helmets are specially designed for extreme off-road riding for motocross or enduro races. They have a very long chin and a large visor for protection from the sun or branches.

They are usually lighter compared to full-face or flip-up helmets to be comfortable for the rider. They are not recommended for riding in the city or on highways.
Weight (+/-50 gr)
1350 gr

Weight (+/-50 gr)

Most helmets weigh around 1500gr and some can reach up to 1800gr. Additionally, the material is also an important factor for the weight of the helmet, with carbon helmets being considered lighter.
Colour
Red
Material
Thermoplastic

Material

Thermoplastic

This is a plastic material mainly used in more affordable and entry-level helmets.

Thermoplastic shells, such as Polycarbonate or ABS, offer basic protection through deformation upon impact, with greater weight and lower production cost compared to composite materials.
Clasp
Double D Ring

Clasp

Double D Ring

The helmet is fastened with 2 metal rings that the strap passes through between them. 2. It is a mechanism that securely holds the helmet without coming undone. 3. It is not recommended for use with helmets that frequently come off as the fastening requires time. It does not easily break or malfunction compared to the microlock fastening.
Certification
ECE 22.06

Certification

Certification refers to the official inspection that confirms the helmet meets specific safety standards as defined by international organizations (e.g., ECE, DOT). It is an indication that the helmet has been tested and approved for its ability to protect in real collision conditions.

ECE 22.06

New European-type safety specification certification "ECE 22.06", which ensures that the helmet is tested at 18 impact check points instead of 6 as was previously the case. It is now considered the most modern and comprehensive standard for helmet safety in Europe.
Pinlock (Anti-fog Film)
Not Supported

Pinlock (Anti-fog Film)

Not Supported

It is not compatible with the Pinlock system, so it cannot be installed. In this case, the helmet does not have the fittings for adding the Pinlock inner visor, which means there is no special protection against fogging or misting of the visor.

Extra Features

Removable / Washable Interior
Yes

Removable / Washable Interior

The helmet's interior lining can be removed and washed.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

119,95 €
6,00 € to a Skroutz Point
or   7,00 €   shipping cost