The IK Multimedia iLoud Precision 6 MKII active studio monitor speaker combines a 6.5-inch woofer with a paper coating and a 1.5-inch tweeter with a graphene-reinforced fabric dome. The system is controlled by DSP with a 96 kHz sampling rate and includes built-in ARC room calibration and ARC X technology, allowing the response to adapt to the listening environment. The frequency response is 45 Hz–22.5 kHz (±1 dB), while low-frequency extension reaches 37 Hz (-4 dB).

The Class-D amplifiers deliver a total of 150 W RMS. The bass-reflex design and 6th-order linear-phase crossover at 1.35 kHz support a coherent time response across the audio spectrum. ARC X setup and measurement are controlled via a remote control, while ARC X control software is available for macOS and Windows.

• Type: Active studio monitor speaker
• RMS power: 150 W
• Maximum sound pressure level: 103 dB
• Woofer: 6.5 inches, paper-coated
• Tweeter: 1.5 inches, graphene-reinforced fabric dome
• Amplifiers: Class-D, 120 W for low frequencies and 30 W for high frequencies
• DSP control: Full, with a 96 kHz sampling rate
• Frequency response: 45 Hz–22.5 kHz (±1 dB)
• Low-frequency extension: 37 Hz (-4 dB)
• Crossover frequency: 1.35 kHz
• Crossover type: 6th-order, linear phase
• Latency: 2.46 ms
• Additional adjustable delay: 0–10 ms
• High-pass filter: Off, 35, 50, 65 or 80 Hz
• Low-frequency adjustment: -10 to +6 dB
• Desk adjustment: -10 to 0 dB
• Mid-frequency adjustment: -4 to +4 dB
• High-frequency adjustment: -6 to +6 dB
• Input gain adjustment: ±5 dB
• Sensitivity: -4 dBu / 90 dB SPL
• Amplifier distortion at rated power: 0.005%
• Unit-to-unit consistency: ±0.5 dB
• Connectivity: Mic, USB-A, USB-B
• Room calibration: Built-in ARC with ARC X technology
• ARC X control software: macOS and Windows
• Operating temperature: 0–35 °C, non-condensing
• Quantity: 1
• Colour: Black
• Package contents: Power cable, ARC microphone, ARC microphone clamp, 2.5 m USB-B to USB-A cable, set of 4 iLoud isolation pads