Surface preparation:

• The surface to be painted must be cleaned of dust, grease, oils, peeled old paints, rust, mold or moisture residues.
• For new or porous surfaces, it is recommended to apply the corresponding primer of the product (Life dur, Life dur water) before application.

Application:

• Apply in 2 coats (after thorough stirring) with a 1 - 2 hour interval between them.
• Thinning: First coat: 15% water. Second coat: 5-10% water.

Application conditions:

• Avoid application at temperatures below 6°C and above 40°C, as well as when relative humidity is above 80%.
• Adverse conditions may alter the final properties of the paint.

Application tools:

• Brush
• Roller
• Paint spray gun

During work, keep the tools "wet" inside the container or the product’s holder. Drain the tools well back into the can and clean them with warm water and soap.

Caution: Wear protective gloves, protective clothing, and personal protective equipment for eyes and face. In case of contact with eyes, rinse carefully with plenty of water for several minutes. If contact lenses are worn, remove them if easy to do so and continue rinsing.