Skroutz.cy

Mimosa C5c-EF Access Point Wi‑Fi 5 Single Band (5GHz) for Outdoor Placement
Access Points

Mimosa C5c-EF Access Point Wi‑Fi 5 Single Band (5GHz) for Outdoor Placement

The Mimosa C5c-EF access point supports point-to-point (PTP) and point-to-multipoint (PTMP) connections for short- and long-range backhaul and wireless access applications. Its antenna-connector...

The Mimosa C5c-EF access point supports point-to-point (PTP) and point-to-multipoint (PTMP) connections for short- and long-range backhaul and wireless access applications. Its antenna-connector design allows connection to compatible antennas, while its 2x2:2 MIMO OFDM technology supports modulation up to 256 QAM. It features a Gigabit Ethernet port and...

See full description See full description

Top specs

  • Ethernet Ports

    Wired connection capability through an Ethernet network port. It allows connection via Ethernet cable, ensuring a stable and reliable connection, high data transfer speeds, and reduced interference compared to Wi-Fi.

  • Frequency

    The frequencies at which the Access Point can transmit.
    2. Additional frequencies allow for greater speed on more devices.

    Single Band (5GHz)

    An Access Point that only connects to the 5GHz frequency provides higher data transmission speeds and less interference from other wireless networks compared to the 2.4GHz frequency. This is because the 5GHz frequency has a wider bandwidth and more available channels, allowing for greater parallel data transmission. Finally, it covers smaller areas compared to 2.4GHz.

  • Wi-Fi Generation

    Wi‑Fi 5

    The most widespread Wi-Fi standard, significantly faster than Wi-Fi 4. Wi-Fi 5 can meet the needs of most users for now. The next generation (Wi-Fi 6) began to be released in 2019 and offers the ability to connect many more devices to accommodate the increasing number of smart devices in a home.

    Each newer generation is compatible with devices that support a previous one.
  • See all
The product is not available for shipping to the selected country.
Review the product
Product report

Description

Description

The Mimosa C5c-EF access point supports point-to-point (PTP) and point-to-multipoint (PTMP) connections for short- and long-range backhaul and wireless access applications. Its antenna-connector design allows connection to compatible antennas, while its 2x2:2 MIMO OFDM technology supports modulation up to 256 QAM. It features a Gigabit Ethernet port and Passive PoE power.

  • Placement: Outdoor
  • Frequency: Single Band (5GHz)
  • Wi-Fi generation: Wi‑Fi 5
  • Networking standards: IEEE 802.11 b/g/n, 802.11a, 802.11ac
  • Modes: PTMP Client, PTP Backhaul
  • MIMO technology: 2x2:2 MIMO OFDM
  • Maximum transmit power: 27 dBm
  • Maximum transmission speed: 700 Mbps IP (866 Mbps PHY)
  • Channel bandwidth: 20/40/80 MHz, with 5 MHz increments for Mimosa SRS
  • Frequency range: 4900–6400 MHz
  • Ethernet ports: 1
  • LAN speed: 10/100/1000 Mbps
  • PoE support: Passive PoE (24–56 VDC)
  • Maximum power consumption: 9.2 W
  • Antenna connectors: 2 RP-SMA
  • Dimensions: 44 × 65 × 188.4 mm
  • Weight: 295 g
  • Ingress protection: IP55
  • Operating temperature: -40 to +55 °C
  • Operating humidity: 5–100% with condensation
  • Maximum operating altitude: 4420 m
  • Management: Mimosa cloud, SNMPv2, Syslog, HTTPS, and an HTML5-based Web UI
  • Security: WPA2 and Mimosa 802.1x Client
  • QoS: 4 preset levels
  • Package: Single Kit

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Technical Specifications

Frequency
Single Band (5GHz)

Frequency

The frequencies at which the Access Point can transmit.
2. Additional frequencies allow for greater speed on more devices.

Single Band (5GHz)
An Access Point that only connects to the 5GHz frequency provides higher data transmission speeds and less interference from other wireless networks compared to the 2.4GHz frequency. This is because the 5GHz frequency has a wider bandwidth and more available channels, allowing for greater parallel data transmission. Finally, it covers smaller areas compared to 2.4GHz.
Wi-Fi Generation
Wi‑Fi 5

Wi-Fi Generation

Wi‑Fi 5

The most widespread Wi-Fi standard, significantly faster than Wi-Fi 4. Wi-Fi 5 can meet the needs of most users for now. The next generation (Wi-Fi 6) began to be released in 2019 and offers the ability to connect many more devices to accommodate the increasing number of smart devices in a home.

Each newer generation is compatible with devices that support a previous one.
IEEE Networking Standards
802.11 b/g/n, 802.11a, 802.11ac
LAN speed
100 Mbps, 1000 Mbps
Wi-Fi Mesh Network
No

Wi-Fi Mesh Network

Technology that allows the creation of a unified, flexible network where multiple Access Points work together to provide broader and more stable Wi-Fi coverage. Ideal for large homes, offices, and businesses.
Ethernet Backhaul
No

Ethernet Backhaul

The wired connection between access points using an Ethernet cable, so that their communication does not burden the wireless network. It offers greater stability, higher speeds, and better coverage compared to wireless backhaul.
Transmit Power (max)
27 dBm

Transmit Power (max)

Indicates how strong the signal emitted by the device is. A higher value means a stronger signal and greater range, always depending on the space and conditions.
PoE Support
PoE

PoE Support

PoE
Device powered through the network cable, without a separate power adapter. Offers simple installation with a single cable.
MIMO Technology
2x2

MIMO Technology

Technology that uses multiple antennas for simultaneous sending and receiving of data. This improves the speed and stability of Wi-Fi, especially when there are many connected devices.

General Characteristics

Placement
Outdoor
Ethernet Ports
1

Ethernet Ports

Wired connection capability through an Ethernet network port. It allows connection via Ethernet cable, ensuring a stable and reliable connection, high data transfer speeds, and reduced interference compared to Wi-Fi.
Packaging
Single Kit

Installation Type

Ceiling
No

Ceiling

Ceiling installation for uniform coverage of the area from above. Ideal for offices, shops, and professional spaces.
Wall
No

Wall

Wall mounting for targeted coverage of specific areas or rooms. Suitable for more flexible installations.
Board games
No

Board games

Placement on a surface (e.g. desk or shelf) without permanent installation. Ideal for easy use and quick setup.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications
Questions

Questions

Do you have a question about the product?

Those users who have this product can help you

Ask for the product

Description & Specifications

The Mimosa C5c-EF access point supports point-to-point (PTP) and point-to-multipoint (PTMP) connections for short- and long-range backhaul and wireless access applications. Its antenna-connector design allows connection to compatible antennas, while its 2x2:2 MIMO OFDM technology supports modulation up to 256 QAM. It features a Gigabit Ethernet port and Passive PoE power.

  • Placement: Outdoor
  • Frequency: Single Band (5GHz)
  • Wi-Fi generation: Wi‑Fi 5
  • Networking standards: IEEE 802.11 b/g/n, 802.11a, 802.11ac
  • Modes: PTMP Client, PTP Backhaul
  • MIMO technology: 2x2:2 MIMO OFDM
  • Maximum transmit power: 27 dBm
  • Maximum transmission speed: 700 Mbps IP (866 Mbps PHY)
  • Channel bandwidth: 20/40/80 MHz, with 5 MHz increments for Mimosa SRS
  • Frequency range: 4900–6400 MHz
  • Ethernet ports: 1
  • LAN speed: 10/100/1000 Mbps
  • PoE support: Passive PoE (24–56 VDC)
  • Maximum power consumption: 9.2 W
  • Antenna connectors: 2 RP-SMA
  • Dimensions: 44 × 65 × 188.4 mm
  • Weight: 295 g
  • Ingress protection: IP55
  • Operating temperature: -40 to +55 °C
  • Operating humidity: 5–100% with condensation
  • Maximum operating altitude: 4420 m
  • Management: Mimosa cloud, SNMPv2, Syslog, HTTPS, and an HTML5-based Web UI
  • Security: WPA2 and Mimosa 802.1x Client
  • QoS: 4 preset levels
  • Package: Single Kit

Manufacturer

Manufacturer Details

Warnings & Safety Information

Technical Specifications

Frequency
Single Band (5GHz)

Frequency

The frequencies at which the Access Point can transmit.
2. Additional frequencies allow for greater speed on more devices.

Single Band (5GHz)
An Access Point that only connects to the 5GHz frequency provides higher data transmission speeds and less interference from other wireless networks compared to the 2.4GHz frequency. This is because the 5GHz frequency has a wider bandwidth and more available channels, allowing for greater parallel data transmission. Finally, it covers smaller areas compared to 2.4GHz.
Wi-Fi Generation
Wi‑Fi 5

Wi-Fi Generation

Wi‑Fi 5

The most widespread Wi-Fi standard, significantly faster than Wi-Fi 4. Wi-Fi 5 can meet the needs of most users for now. The next generation (Wi-Fi 6) began to be released in 2019 and offers the ability to connect many more devices to accommodate the increasing number of smart devices in a home.

Each newer generation is compatible with devices that support a previous one.
IEEE Networking Standards
802.11 b/g/n, 802.11a, 802.11ac
LAN speed
100 Mbps, 1000 Mbps
Wi-Fi Mesh Network
No

Wi-Fi Mesh Network

Technology that allows the creation of a unified, flexible network where multiple Access Points work together to provide broader and more stable Wi-Fi coverage. Ideal for large homes, offices, and businesses.
Ethernet Backhaul
No

Ethernet Backhaul

The wired connection between access points using an Ethernet cable, so that their communication does not burden the wireless network. It offers greater stability, higher speeds, and better coverage compared to wireless backhaul.
Transmit Power (max)
27 dBm

Transmit Power (max)

Indicates how strong the signal emitted by the device is. A higher value means a stronger signal and greater range, always depending on the space and conditions.
PoE Support
PoE

PoE Support

PoE
Device powered through the network cable, without a separate power adapter. Offers simple installation with a single cable.
MIMO Technology
2x2

MIMO Technology

Technology that uses multiple antennas for simultaneous sending and receiving of data. This improves the speed and stability of Wi-Fi, especially when there are many connected devices.

General Characteristics

Placement
Outdoor
Ethernet Ports
1

Ethernet Ports

Wired connection capability through an Ethernet network port. It allows connection via Ethernet cable, ensuring a stable and reliable connection, high data transfer speeds, and reduced interference compared to Wi-Fi.
Packaging
Single Kit

Installation Type

Ceiling
No

Ceiling

Ceiling installation for uniform coverage of the area from above. Ideal for offices, shops, and professional spaces.
Wall
No

Wall

Wall mounting for targeted coverage of specific areas or rooms. Suitable for more flexible installations.
Board games
No

Board games

Placement on a surface (e.g. desk or shelf) without permanent installation. Ideal for easy use and quick setup.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.