The rim restoration and painting kit includes all the necessary materials for the repair and renovation of rims. It is suitable for use by anyone, following the included instructions.

The kit includes:

• 2 x 400 ml Champion spray paint
• 1 x 500 ml Champion clear varnish spray
• 1 x special filler for aluminum rims
• 1 x set of disposable gloves
• 1 x set of sandpapers with different grits for surface correction
• 1 x masking tape roll for protecting the edge of the tire

Application instructions:

1. Thoroughly clean the rims to remove dust or grease.
2. Smooth the rim scratches to repair them and create a rough surface for the filler to adhere to.
3. Clean again or blow off any metal residue from sanding.
4. Apply masking tape around the rim, on the tire, to protect it from paint fumes.
5. Apply the filler to the rim scratches using a spatula, stick, or fingers (use the gloves included in the kit) to fill the scratches or cracks.
6. After about 10 minutes, when the filler hardens, sand the surface with fine-grit sandpaper.
7. If the filler does not cover all scratches, repeat the process as many times as necessary until all holes are filled.
8. After sanding, use sandpapers with progressively finer grits to prepare the surface for painting.
9. If you want to paint the entire rim and not just the affected areas, prepare the surface of the whole rim with fine sandpaper.
10. Clean the rim surface from any sanding residue.
11. Shake the spray paint for about 2 minutes to homogenize it and apply it to the rim with smooth, even strokes.
12. After 10-20 minutes of drying, apply the next layer of paint. It is recommended to apply 2-3 coats for optimal coverage.
13. Finally, after applying the paint layers and drying, apply the clear varnish layer in the same way as the paint layers.
14. For high gloss, apply multiple layers of varnish with drying time intervals between applications. Applying the varnish is optional; in some cases, the paint surface is glossy enough even without applying the clear varnish.