Complete rim repair and painting kit. The kit includes quality products from AVEX.ro for the repair, renovation, and painting of rims. It is a DIY type and can be used by anyone following the included instructions.

The kit contains:

• 2 x 400 ml Champion paint spray
• 1 x 500 ml Champion clear lacquer spray
• 1 x special filler for aluminum rims
• 1 x set of disposable gloves
• 1 x set of sandpapers with different grits for surface correction before and after applying the filler
• 1 x masking tape roll to protect the tire edge

Note: The rim shown in the image is for presentation purposes and is not included in the package.

Application instructions:

1. Thoroughly clean the rims to remove dust or grease.
2. Smooth out the rim’s dents to repair them and create a rough surface for the filler to adhere to.
3. Clean again or blow off any metal debris resulting from the sanding.
4. Apply the masking tape around the rim, on the tire, to protect it from paint fumes.
5. Apply the filler to the rim dents using a spatula, wood, or fingers (use the gloves included in the kit).
6. After about 10 minutes, once the filler hardens, smooth the surface with fine-grit sandpaper.
7. If the filler did not cover all dents, repeat the process as many times as needed until all holes are filled.
8. After smoothing with the corrective sandpaper, finish with progressively finer sandpapers to prepare the surface for painting.
9. If you want to paint the entire rim, prepare the entire surface with fine sandpaper.
10. Clean the rim surface from any sanding residues.
11. Shake the paint spray for about 2 minutes to homogenize and apply it to the rim with smooth, even strokes.
12. After about 10-20 minutes of drying, apply the next paint layer. It is recommended to apply 2-3 layers for optimal coverage.
13. Finally, after applying the paint layers and drying, apply the lacquer layer in the same way as the paint layers.
14. For high gloss, apply multiple lacquer layers with dry intervals. Applying lacquer is optional; in some cases, the paint surface is glossy enough even without the clear lacquer application.