Special Paint & Additives

Sigmafast 205 Epoxy Floor Paint for Cementitious Floors and Metal Surfaces Ral 3020

Sigmafast 205 epoxy paint overlay for painting concrete and metal surfaces - RAL 3020

The paint is available in 1-liter packages and is packaged in replaceable bags from the original 20-liter...

Sigmafast 205 epoxy paint overlay for painting concrete and metal surfaces - RAL 3020

The paint is available in 1-liter packages and is packaged in replaceable bags from the original 20-liter container.

Two-component, high solids content epoxy paint.

Main advantages of the paint:

  • Weather and UV resistant
  • Wear resistant
  • Waterproof, hydrophobic
  • Very fast...
See Description & Specifications See Description & Specifications
This product is temporarily unavailable at Skroutz Last updated: 19 days ago
Questions

Description & Specifications

Sigmafast 205 epoxy paint overlay for painting concrete and metal surfaces - RAL 3020

The paint is available in 1-liter packages and is packaged in replaceable bags from the original 20-liter container.

Two-component, high solids content epoxy paint.

Main advantages of the paint:

  • Weather and UV resistant
  • Wear resistant
  • Waterproof, hydrophobic
  • Very fast curing
  • Can be painted with most two-component epoxy and polyurethane paints
  • Durable and long-lasting elasticity
  • Easy application with brush, roller, or spray gun
  • Suitable as a protective coating for steel and concrete in interior painting

Concrete painting instructions:

First coat: The first coat is the Sigmafast 205 paint with Solid Thinner 92 solvent.

Ratios per primer for an area of approximately 10m²:

  • BASE - 1 liter
  • HARDENER - 0.330 liters
  • Solvent - 0.4 liters

Second coat: Only Sigmafast 205 is applied in subsequent coats. The base and hardener must be mixed in a 3:1 ratio.

  • 1 liter BASE per 0.330 liters HARDENER

Note: The paint’s coverage depends on the absorbency of the concrete and the thickness of the protection.

The packaging is sufficient to paint up to 3m² of finished floor with a thickness of 200 microns.

To achieve the desired effect, scatter decorative flakes on the fresh coating and wait 8 hours. Then protect the surface with Sigmadur Clearcoat polyurethane resin.

Technical data:

  • Touch dry time: 3 hours
  • Second coat application at 20°C: After 4 hours
  • Solid content: 70%
  • Gloss: Semi-gloss
  • Recommended thinner: Sigma 91-92 or Solid Thinner 92
  • Full cure time: 3 days

Available ONLY in US PRICE colors from the RAL and NCS color charts.

Colors on the charts are indicative and may slightly differ from the actual colors due to screen resolution.

The product is painted according to the customer's order and is non-returnable.

Use of a mask is recommended in enclosed and poorly ventilated areas due to the volatile odor of the solvent. Use of a mask with ABE1P3 filters is advised.

Manufacturer

Specifications

Type
Floor Painting
Colour
Red
Acrilyc
No

Quantity

Volume
20 lt

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.