The resin-modified cement-based Fixotile Ultra 20 tile adhesive, type C2TE according to EN 12004, is intended for absorbent and non-absorbent tiles, such as granite, natural stone, porcelain, clinker and ceramic tiles. It can be applied to floors and walls, indoors and outdoors. It features zero slip, an extended open time of 30 minutes and a maximum application thickness of 10 mm.
The vinyl copolymer resins contribute to adhesion and moisture resistance on standard substrates. The adhesive is suitable for dry construction substrates, such as plasterboard and cement boards, as well as for areas with high humidity when applied to standard substrates. It is certified EMICODE EC1PLUS for very low emissions of volatile compounds.
- Type: Tile adhesive
- Quantity: 25 kg
- Colour: White
- Type: C2TE according to EN 12004
- Suitable for: Absorbent and non-absorbent tiles
- Application: Floors and walls, indoors and outdoors
- Dry construction substrates: Plasterboard and cement boards
- Open time: 30 minutes
- Pot life: 4 hours
- Adjustment time: 30 minutes
- Application thickness: Up to 10 mm
- Mixing ratio: 7.5–8 L of water per 25 kg
- Dry mortar density: 1.33 ± 0.05 kg/L
- Fresh mix density: 1.85 ± 0.05 kg/L
- Maximum grain size: 600 μm
- Application temperature: From +5°C to +35°C
- Wall grouting: After 4–8 hours
- Floor grouting: After 24 hours
- Light foot traffic: After 24 hours
- Full use: After 14 days
- Consumption: 3–5 kg/m²
- Initial tensile adhesion strength after 28 days: ≥ 1.50 N/mm²
- Slip: ≤ 0.5 mm
- Tensile adhesion strength after 30-minute open time: ≥ 0.50 N/mm²
- Reaction to fire: Euroclass A1
- Certification: EMICODE EC1PLUS
- Storage: 12 months in the original packaging, in a dry place
Manufacturer
OEM- Type
- Tiles
- Quantity
- 25 kg
- Colour
- White
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.