Quality and properties: 1K primer-filler with very good anti-corrosive protection, functioning simultaneously as filler and primer. Suitable for isolating sanded surfaces, with a short drying time and very good flow. Easy to apply and can be painted over with water-based and solvent-based lacquers, as well as 1K and 2K topcoats.

Physical and chemical characteristics:

• Binder: polyvinyl butyral.
• Color: Grey.
• Odor: solvent.
• Coverage: 400 ml is sufficient for approximately 1.0 m², depending on the texture and color of the substrate.
• Drying time: Dust dry in 8–10 minutes, touch dry in 15 minutes, fully dry in 30–40 minutes.
• Temperature resistance: up to 250°C.
• Shelf life: 10 years if stored properly (10°–25°C, maximum relative humidity 60%).
• Container/Contents: Spray, maximum nominal volume 400 ml.
• VOC value: 168.6 g.

Instructions for use: Read carefully and follow the warnings on the label. Remove all rust and thoroughly clean the surface. Ensure the area is dry and free from dust and grease. Shake the can well for 2 minutes and perform a test spray. Do not apply on polyester products. Wear a suitable respiratory mask (type A2/P3 recommended).

Warning word: Danger. Hazardous ingredients: Propanol-1, butanol, acetone. Hazard statements include: Extremely flammable aerosol, pressurized container. Causes skin irritation and serious eye irritation. If medical advice is needed, have the product container at hand. Keep away from children, heat, sparks, and flames. Do not smoke.