Quality and properties: Advanced 1K acrylic putty with excellent filling and covering properties. Ideal for filling small scratches and imperfections on sanded substrates with good adhesion to all metal surfaces. It has a very smooth flow.
Physical and Chemical Characteristics:
- Binder: Acrylic resin
- Color: Grey
- Odor: Solvent
- Coverage: 1.25-1.75 m²
- Surfaces: Bare sanded metal, sanded primed parts, sanded hardened paints, sanded polyester substrates, sanded steel, and sanded aluminum
Drying Time (at 20°C, 50% relative humidity):
- Dust dry: 5 minutes
- Touch dry: 15-20 minutes
- Fully dry: 60 minutes
- Recoat: 15-20 minutes (wet on wet)
Temperature resistance: 110°C
Shelf life: Up to 10 years if stored properly (10°–25°C, maximum relative humidity 60%)
Packaging: Aerosol spray, maximum nominal volume 400ml
VOC content: 217g
Instructions for use: Before use, read carefully and follow the warnings on the label. Remove all rust from damaged areas where required. Clean the surface thoroughly and sand. The damaged area must be dry and free from grease and dust. Shake the can well for 2 minutes. Perform a test spray.
Warning word: Danger.
Hazardous ingredients: n-butyl acetate, acetone, 2-methoxy-1-methylethyl acetate, 1-butanol. Use requires caution and compliance with relevant safety measures.
- Suitable for
- Leather
- Spray Type
- Primer
- Capacity
- 400 ml
- Colour
- Grey
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.