Giolli 762 Acquaver Ferromicace paint is a water-based anti-rust enamel for metal surfaces, with a textured matt, wrought-iron effect finish. It contains micaceous iron oxides and is suitable for iron, cast iron and non-anodised aluminium, for indoor and outdoor use. Apply with a brush, short-pile roller or spray gun. Touch-dry in approximately 40 minutes.
Apply two coats to new surfaces, with a coverage of approximately 8–10 m²/L per coat. For metal, ACQUAVER ANTIRUGGINE primer is recommended beforehand. Thin with water: 2–10% for brush or roller application and 10–15% for spraying. Clean tools with warm water immediately after use.
- Suitable surfaces: Iron, cast iron and non-anodised aluminium
- Use: Interior and exterior
- Base: Water-based
- Property: Anti-rust protection
- Finish: Textured matt, wrought-iron effect
- Colour: Oro Antico
- Application: Brush, short-pile roller or spray gun
- Thinning: With water, 2–10% for brush or roller and 10–15% for spraying
- Coverage: Approximately 8–10 m²/L per coat
- Coats: 2 on new surfaces
- Touch-dry: Approximately 40 minutes
- Fully dry: Approximately 6 hours
- Recoat: After at least 6–8 hours
- Quantity: 0.75 L
- Product Number
- 0211601.007
Product Details
- Type
- Metal, Wood
- Type
- -
- Colour
- Gold
- Quantity in lt
- 0.75 lt
Especially
- Properties
- Corrosion Inhibitor
- Finish
- Matt
- Acrilyc
- No
- Water
- Yes
- Solvent
- No
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.