Instructions for Use:

• Remove rust and dirt.
• The surface must be clean, dry, and free from grease.
• If necessary, apply primer.
• Cover/insulate areas that you do not want to paint.
• Before use, shake the spray well for 2-3 minutes.
• Perform a test spray to check the shade and compatibility with the surface.
• Spray from a distance of about 25 cm, applying several thin cross-coats.

Warning word: Danger.

Hazardous ingredients must be listed on the labels: acetone, n-butyl acetate, 1-methoxy-2-propyl acetate.

Hazard statements: Extremely flammable aerosol. Pressurized container. May burst if heated. Causes serious eye irritation. May cause drowsiness or dizziness.

Precautionary statements: If medical advice is needed, have the product container or label at hand. Keep out of reach of children. Keep away from heat, hot surfaces, sparks, open flames, and other sources of ignition. No smoking. Do not spray near an open flame or other source of ignition. Do not pierce or burn, even after use. Do not breathe spray. Protect from sunlight. Do not expose to temperatures exceeding 50°C. Dispose of contents/container in accordance with local regulations.

Supplementary statements: EUH066 Prolonged exposure may cause dry or cracked skin. Without adequate ventilation, explosive mixtures may form.

Supplementary indications: Xylene: Contains ethylbenzene, CAS Number 100-41-4, CAS 9004-70-0: GB CLP Note T