Instructions for use: Ambient temperature: 15–25°C. Surfaces must be stable, clean, solid, dry, and free from grease, wax, and film. Sand weathered wooden parts and remove old varnishes by sanding. The clear varnish is not suitable as a sole coating for outdoor use. Shake the can for 2 minutes and perform a test spray. Optimal spraying distance: approximately 25 cm. Apply at least two cross coats. The number of coats affects the shade – each additional coat darkens the color. When painting claddings, it is recommended to protect the wood on both sides. Do not cover with acrylic varnish.

Caution: Spray mist is created.

Warning word: Danger. Hazard statements: Extremely flammable aerosol. Pressurized container. May burst if heated.

Precautionary statements: If medical advice is needed, have the product container or label at hand. Keep out of reach of children. Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking. Do not spray near an open flame or other ignition source. Do not pierce or burn, even after use. Do not breathe spray. Protect from sunlight. Do not expose to temperatures exceeding 50°C. Dispose of contents/container in accordance with local regulations.

Supplementary statements: EUH066 Repeated exposure may cause skin dryness or cracking. Explosive mixtures may form without sufficient ventilation. Additional information: The benzene content (EINECS No. 200-753-7) in the ingredients is less than 0.1% (Note P, Annex 1A of Regulation 1272/2008 of the EU), therefore classification as carcinogenic is not required.