The surface must be clean, dry, and free from rust and grease. It is essential to shake the can vigorously for about 2 minutes. Perform a test spray on an inconspicuous area and apply several covering coats. Spray from a distance of approximately 25 cm. Recoating with the same product and application of a final varnish after the last coat is possible.

Warning word: Danger

• Hazardous ingredients: Acetone, Hydrocarbons C9, aromatic
• Extremely flammable aerosol
• Pressurized container
• Causes serious eye irritation
• May cause drowsiness or dizziness
• Toxic to aquatic life with long-lasting effects

Precautionary statements: If medical advice is needed, have the product container or label at hand. Keep out of reach of children. Keep away from heat, hot surfaces, sparks, open flames, and other sources of ignition. No smoking. Do not spray near an open flame or other ignition source. Do not pierce or burn, even after use. Do not breathe spray. Protect from sunlight. Do not expose to temperatures exceeding 50°C. Dispose of contents/container in accordance with local regulations.

Supplementary statements: EUH066 Repeated exposure may cause skin dryness or cracking. Explosive mixtures may form without sufficient ventilation. Supplementary information: The benzene content (EINECS No. 200-753-7) in the ingredients is less than 0.1%, therefore classification as carcinogenic is not required. Xylene: Contains ethylbenzene CAS 100-41-4.