Instructions for use: Remove old paint and rust and sand the surface. The surface must be clean, dry, and free of grease. Cover areas that will not be painted. Before use, shake the can for 2 minutes. Spray several thin coats at intervals of 2 minutes. The thinner the coat, the better the temperature resistance will be. The spraying distance should be approximately 25 cm. Allow to dry for 1 hour. Then, heat for about 1 hour at 160°C to stabilize the color.

Warning word: Danger. Hazardous ingredients: hydrocarbons C6-C7, hydrocarbons C9 aromatic, acetone, 1-butanol. Hazard statements: Extremely flammable aerosol. Pressurized container. May burst if heated. Causes skin irritation. Causes serious eye irritation. May cause drowsiness or dizziness. Toxic to aquatic life with long-lasting effects.

Precautionary statements: If medical advice is needed, have the product container or label at hand. Keep out of reach of children. Keep away from heat, hot surfaces, sparks, open flames, and other sources of ignition. No smoking. Do not spray near an open flame or other source of ignition. Do not pierce or burn, even after use. Do not breathe spray. Protect from sunlight. Do not expose to temperatures exceeding 50°C. Dispose of contents/container in accordance with local regulations.

Supplementary statements: Explosive mixtures may form without sufficient ventilation. Supplementary information: The benzene content (EINECS no. 200-753-7) in the ingredients is less than 0.1%. Xylene contains ethylbenzene (CAS 100-41-4).