Instructions for use: Remove rust and dirt. The surface must be clean, dry, and free of grease. Cover areas that will not be painted. Apply a white primer, e.g. DUPLI-COLOR Primer white. (Not on polystyrene surfaces!) Shake the can for 3 minutes before use. Test the spray on an inconspicuous area. Spray from a distance of 12–15 cm with several thin layers. Do not spray on surfaces painted with synthetic resin varnish!

Warning word: Danger. Hazardous ingredients: acetone, n-Butyl acetate ethyl ester, 2-methoxy-1-methylethyl acetate.

• Pressurized container. May burst if heated.
• Causes serious eye irritation.
• May cause drowsiness or dizziness.

Precautionary statements: If medical advice is needed, have the product container or label at hand. Keep out of reach of children. Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking. Do not spray near open flame or other ignition sources. Do not pierce or burn, even after use. Do not breathe spray. Protect from sunlight. Do not expose to temperatures exceeding 50 °C. Dispose of contents/container in accordance with local regulations.

Supplementary statements: EUH066 Repeated exposure may cause skin dryness or cracking. Explosive mixtures can form if there is insufficient ventilation.

Additional information: The benzene content (EINECS number: 200-753-7) in the ingredients is less than 0.1%, therefore classification as carcinogenic is not required.