Spray Paints

Instructions for Use:

• Remove rust and dirt.
• The surface must be clean, dry, and free from grease.
• If necessary, apply primer.
• Cover/protect areas that are not intended/wanted to be painted.
• Before use, shake the spray can well for 2-3 minutes.
• Perform a test spray to check the shade and compatibility with the surface.
• Spray from a distance of about 25 centimeters, applying several thin cross passes.

Caution: Do not apply over synthetic paints!

Warning word: Danger.

• Hazardous ingredients: acetone, n-butyl acetate, 1-methoxy-2-propyl acetate.
• Extremely flammable aerosol.
• Pressurized container; may burst if heated.
• Causes serious eye irritation.
• May cause drowsiness or dizziness.

Precautionary statements:

• If medical advice is needed, have the product container or label at hand.
• Keep out of reach of children.
• Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources.
• Do not smoke.
• Do not spray near open flames or other ignition sources.
• Do not pierce or burn, even after use.
• Do not inhale vapors.
• Protect from sunlight.
• Do not expose to temperatures exceeding 50 °C.
• Dispose of contents/container in accordance with local regulations.

Additional statements:

• EUH066: Repeated exposure may cause skin dryness or cracking.
• Explosive mixtures can form without adequate ventilation.
• Xylene: Contains ethylbenzene, CAS number 100-41-4, CAS 9004-70-0: GB CLP Note T.