Instructions for Use: Remove rust and dirt. The surface must be clean, dry, and free of grease. If necessary, apply a primer. Cover/insulate areas that you do not want to paint or cannot be painted. Before use, shake the spray well for 2-3 minutes. Do a test spray to check the color and compatibility with the surface. Spray from approximately 25 centimeters away, applying several thin cross coats.

Attention: Do not apply over synthetic paints!

Warning: Hazard. Dangerous components: acetone, n-butyl acetate, 1-methoxy-2-propanol acetate. Risk statements: Extremely flammable aerosol. Pressurized container. May burst if heated. Causes serious eye irritation. May cause drowsiness or dizziness.

Precautionary statements: If medical advice is needed, have the product container or label at hand. Keep out of reach of children. Keep away from heat, hot surfaces, sparks, open flames, and other sources of ignition. Do not smoke. Avoid spraying near an open flame or other ignition sources. Do not pierce or burn, even after use. Do not breathe spray. Protect from sunlight. Do not expose to temperatures exceeding 50°C. Dispose of contents/container according to local regulations.

Additional statements: EUH066 Prolonged exposure may cause skin dryness or cracking. Explosive mixtures may form in poorly ventilated areas.

Additional information: XYLENE: Contains ethylbenzene, CAS Number 100-41-4, CAS 9004-70-0: GB CLP Note T.