Spray Paints

Instructions for Use:

• Remove rust and dirt.
• The surface must be clean, dry, and free of grease.
• If necessary, apply a primer.
• Cover/mask areas that will not be painted.
• Before use, shake the spray well for 2-3 minutes.
• Perform a test spray to check the color and compatibility with the surface.
• Spray from approximately 25 centimeters away, applying several thin cross passes.

Attention: Do not apply over synthetic paints.

Warning: Hazard.

• Harmful components must be listed on the labels: acetone, n-butyl acetate, 1-methoxy-2-propanol acetate.
• Hazard statements: Extremely flammable aerosol. Pressurized container. May burst when heated. Causes serious eye irritation. May cause drowsiness or dizziness.
• Precautionary statements: If medical advice is needed, have the product container or label at hand. Keep out of reach of children. Keep away from heat, hot surfaces, sparks, open flames, and other sources of ignition. Do not smoke. Do not spray near an open flame or other ignition sources. Do not pierce or burn, even after use. Do not breathe spray fumes. Protect from sunlight. Do not expose to temperatures above 50 °C. Dispose of contents/container in accordance with local regulations.
• Additional statements: EUH066 Repeated exposure may cause dry skin or cracking. Explosive mixtures may form in poorly ventilated areas.
• Additional notes: Xylene: Contains ethylbenzene, CAS Number 100-41-4, CAS 9004-70-0: GB CLP Note T.