Instructions for Use:

• Remove rust and dirt.
• The surface must be clean, dry, and free of grease.
• If necessary, apply primer.
• Cover/insulate areas that are not to be painted.
• Before use, shake the spray well for 2-3 minutes.
• Perform a test spray to check the shade and compatibility with the surface.
• Spray from a distance of about 25 cm, applying several thin, criss-cross coats.

Caution: Do not apply over synthetic paints!

Warning word: Danger.

Hazardous ingredients to be indicated on the labels: acetone, n-butyl acetate, 1-methoxy-2-propanol acetate.

Hazard statements: Extremely flammable aerosol. Pressurized container. May burst if heated. Causes serious eye irritation. May cause drowsiness or dizziness.

Precautionary statements:

• If medical advice is needed, have the product container or label at hand.
• Keep out of reach of children.
• Keep away from heat, hot surfaces, sparks, open flames, and other sources of ignition.
• No smoking.
• Do not spray near open flame or other source of ignition.
• Do not pierce or burn, even after use.
• Do not breathe spray.
• Protect from sunlight.
• Do not expose to temperatures exceeding 50°C.
• Dispose of contents/container in accordance with local regulations.

Supplementary statements: EUH066 Prolonged exposure may cause dry or cracked skin. Explosive mixtures may form without adequate ventilation.

Supplementary indications: Xylene: Contains ethylbenzene, CAS Number 100-41-4, CAS 9004-70-0: GB CLP Note T