Instructions for Use:

• Remove rust and dirt.
• The surface must be clean, dry, and free from grease.
• If necessary, apply primer.
• Cover/protect areas that will not be painted.
• Before use, shake the spray well for 2-3 minutes.
• Perform a test spray to check the shade and compatibility with the surface.
• Spray from a distance of about 25 cm, applying several thin cross-coats.

Caution: Do not apply on synthetic paints!

Warning word: Danger. Hazardous ingredients: acetone, n-butyl acetate, 1-methoxy-2-propanol acetate.

Hazard statements: Extremely flammable aerosol. Pressurized container. May burst if heated. Causes serious eye irritation. May cause drowsiness or dizziness.

Precautionary statements: If medical advice is needed, have the product container or label at hand. Keep out of reach of children. Keep away from heat, hot surfaces, sparks, open flames, and other sources of ignition. No smoking. Do not spray near an open flame or other ignition source. Do not pierce or burn, even after use. Do not breathe spray. Protect from sunlight. Do not expose to temperatures exceeding 50°C. Dispose of contents/container in accordance with local regulations.

Supplementary statements: EUH066 Prolonged exposure may cause skin dryness or cracking. Explosive mixtures may form without adequate ventilation.

Supplementary indications: Xylene: Contains ethylbenzene, CAS Number 100-41-4, CAS 9004-70-0: GB CLP Note T