Sign up in one tap with Google, Apple or Facebook
ELEGOO PLA filament in a marble shade creates prints with a stone-like finish, suitable for decorations, figurines, and architectural models. Its composition includes additives that give the surface its characteristic marble effect. The material is based on PLA, a biodegradable plant-based plastic, and is wound on a cardboard spool with three holes for checking how much filament remains.
The dimensional tolerance is ± 0.02 mm for consistent feeding into the printer. The filament adheres to the print surface and reduces bubbling and excessive stringing. The spool is machine-wound and checked by hand to prevent tangling.
- Material: PLA
- Color: Marble
- Diameter: 1.75 mm
- Dimensional tolerance: ± 0.02 mm
- Weight: 1 kg
- Quantity: 1 piece
- Packaging type: Spool
- Spool material: Cardboard
- Holes in spool: 3
- Drying setting before printing: 55 ± 5 °C
- Nozzle temperature: 190–230 °C
- Bed temperature: 35–65 °C
- Ambient temperature and humidity: Up to 50 °C and up to 20% relative humidity
- Recommended print surface: Textured PEI or another compatible surface
- Printing speed: Less than 300 mm/s
- Density: 1.26 g/cm³
- Melting point: 158 °C
- Heat deflection temperature: 57 °C
- Vicat softening temperature: 62 °C
- Tensile strength (XY): 38 ± 3 MPa
- Elongation at break (XY): 10.5% ± 2.1%
- Flexural strength (XY): 72 ± 5 MPa
- Flexural modulus (XY): 2993 ± 182 MPa
- Impact strength (XY): 66.2 ± 3.9 kJ/m²
- Material
- PLA
- Colour
- Grey
- Diameter
- 1.75 mm
- Weight
- 1 kg
- Filament Packaging
- Spool
- Quantity
- 1 pcs
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.