The Vevor fiber optic fusion splicer aligns the fiber core or cladding using 6 motors and performs a splice in 9 seconds in fast mode or 13 seconds in normal mode. Heating takes 13 seconds, while splice loss can be as low as 0.01 dB for multimode fibers. The 5-inch LCD displays the process in real time, with 320x magnification on the X or Y axis, or 200x on both axes simultaneously; it does not support touchscreen operation.
The 3-in-1 fiber holder is compatible with single-mode and multimode fibers, DS, NZDS, pigtails, bare fibers, and patch cords. The built-in VFL and OPM functions measure connection loss, check continuity, and help assess the transmission quality of optical connections. The rechargeable battery supports up to 260 consecutive splicing and heating cycles per charge.
The kit includes a carrying case, fiber optic fusion splicer, fiber cleaver and stripper, 3-hole pliers, alcohol bottle, air blower, cooling tray, 100 heat-shrink sleeves, brush, 50 cotton swabs, and 2 spare electrodes.
-
Type: Fiber optic fusion splicer
-
Power supply: Battery
-
Alignment: Core or cladding
-
Motors: 6
-
Splicing time: 9 seconds in fast mode, 13 seconds in normal mode
-
Heating time: 13 seconds
-
Splice loss: As low as 0.01 dB for multimode fibers
-
Display: 5-inch LCD
-
Magnification: 320x on one axis or 200x on the X and Y axes simultaneously
-
Touchscreen operation: Not supported
-
Fiber holder: 3-in-1
-
Fiber compatibility: Single-mode, multimode, DS, NZDS, pigtails, bare fibers, and patch cords
-
Functions: VFL and OPM
-
Cycles per charge: Up to 260 splicing and heating cycles
-
Package contents: Carrying case, fusion splicer, fiber cleaver, fiber stripper, 3-hole pliers, alcohol bottle, air blower, cooling tray, 100 heat-shrink sleeves, brush, 50 cotton swabs, and 2 spare electrodes
