Set the delivery location to see products according to your choice.
34 Coins
To earn Skroutz Coins, join Skroutz Plus and accept the terms of the reward program.
Two-component bathtub malt for renovation of sanitary ware and tiles. High adhesion, suitable for application on bathtubs, showers, sinks, tiles, and any ceramic surface, resulting in a highly durable finish. It has excellent resistance to moisture, steam, and household cleaners. It does not scratch or yellow. Available in glossy and satin finish.
Applied over two-component paints or properly prepared surfaces, on walls, tiles, iron, galvanized iron, furniture, PVC, primed plastic, and cement.
Technical characteristics:
Application tools: Brush, roller, spray gun
Thinning percentage:
Surface preparation: The surface must be in good condition, clean, free from dust, grease, and other substances. Use water and household cleaners for cleaning. Do not use cleaners containing silicones or wax. For improved adhesion, lightly sand with sandpaper.
General instructions: Wear protective gloves and mask. Ensure very good ventilation in the area. Apply a primer coat and once dry, continue with the bathtub enamel. Mix only the required amount for one coat. Stir until the mixture is homogeneous. Apply on a dry, clean surface. Never apply at high temperatures. Ambient humidity must be below 80%. Perform a test before application. Wait at least 72 hours before using the bathtub.
Maintenance: Follow the guidelines indicated for preparing new surfaces and check the condition of previous coatings. In case of doubt about adhesion, perform a test or remove old layers and apply as on new surfaces.
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.