Skroutz.cy

Hdl Actuator 2ch 10A Flush-mounted Intermediate Switch 10A
Intermediate Switches

Hdl Actuator 2ch 10A Flush-mounted Intermediate Switch 10A Code: M/FME2R.1

Switch type Intermediate Switches 2CH with flush-mounted capability. Parameters:

  • Voltage input: AC100-240V, 50/60Hz
  • Relay output: 2CH, 10A/CH
  • Dry contact inputs: 4CH
  • LED outputs: 4CH, 12mA/CH
  • Control...

Switch type Intermediate Switches 2CH with flush-mounted capability. Parameters:

  • Voltage input: AC100-240V, 50/60Hz
  • Relay output: 2CH, 10A/CH
  • Dry contact inputs: 4CH
  • LED outputs: 4CH, 12mA/CH
  • Control operation with long press of the button to control all relays
  • Scene control functions, staircase lighting control, and delay
  • Requires Auxiliary Power input...
See full description See full description

Top specs

  • Maximum Load

    It is the maximum amount of current that the switch can withstand without burning out. It shows you how many or how powerful devices you can connect: for simple lights, 10A is enough, while for power-hungry devices (such as a water heater) more Amperes are required.

    For example, a typical LED bulb (e.g. 10W) draws very little current, about 0.04 Amperes. This means that a standard smart switch of 10A is more than sufficient for its operation.

  • Dry Contact

    Dry Contact. It gives you the ability to safely control devices that have their own power supply. It does not transfer current but allows you to control them remotely, without causing a short circuit or damage.
  • See all
110 00 €
110 Coins 110 Coins
Delivery by Wed, 23 Sep
Free   shipping cost
From MS Electronics
Αγ. Αθανάσιος, Λεμεσού
20+ pieces
See Sockets & Switches on the page of MS Electronics
What if it breaks?

You're covered by the statutory 2-year warranty. Contact us and we'll handle the entire process with the store, ensuring your issue is resolved with prompt support through a repair, replacement, or refund.

What if I change my mind?

No problem, as long as it's within 14 days. We'll come pick it up or you can choose the Skroutz Point that suits you, completely free for up to 2 times per year, and we'll refund your money. Get Skroutz Plus to enjoy unlimited free returns.

Learn more about invoicing
Review the product
Product report

Description

Description

Switch type Intermediate Switches 2CH with flush-mounted capability. Parameters:

  • Voltage input: AC100-240V, 50/60Hz
  • Relay output: 2CH, 10A/CH
  • Dry contact inputs: 4CH
  • LED outputs: 4CH, 12mA/CH
  • Control operation with long press of the button to control all relays
  • Scene control functions, staircase lighting control, and delay
  • Requires Auxiliary Power input DC20-30V

Manufacturer

OEM

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Number
M/FME2R.1

Specifications

Number of Channels
2

Number of Channels

Indicates how many different lamps or devices the switch can control independently. For example, a 1-channel switch controls one lighting circuit, while a 4-channel switch can manage up to four different devices from the same unit.

Additional Features

With Remote Control
No

With Remote Control

It allows you to control the switch remotely with a remote control, without needing your smartphone.
Maximum Load
10 A

Maximum Load

It is the maximum amount of current that the switch can withstand without burning out. It shows you how many or how powerful devices you can connect: for simple lights, 10A is enough, while for power-hungry devices (such as a water heater) more Amperes are required.

For example, a typical LED bulb (e.g. 10W) draws very little current, about 0.04 Amperes. This means that a standard smart switch of 10A is more than sufficient for its operation.
Wiring
-
Pieces
1

Features

Dimmer
No

Dimmer

It allows you to adjust the brightness of the lighting instead of simple on/off operation. Bulbs that support dimmable function are required.
Dry Contact
Yes

Dry Contact

Dry Contact. It gives you the ability to safely control devices that have their own power supply. It does not transfer current but allows you to control them remotely, without causing a short circuit or damage.
Consumption Measurement
No

Consumption Measurement

It allows you to see in real time how much electricity your connected device is consuming and to keep a usage history, through your smartphone and the compatible app.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications
Questions

Questions

Do you have a question about the product?

Those users who have this product can help you

Ask for the product

Description & Specifications

Switch type Intermediate Switches 2CH with flush-mounted capability. Parameters:

  • Voltage input: AC100-240V, 50/60Hz
  • Relay output: 2CH, 10A/CH
  • Dry contact inputs: 4CH
  • LED outputs: 4CH, 12mA/CH
  • Control operation with long press of the button to control all relays
  • Scene control functions, staircase lighting control, and delay
  • Requires Auxiliary Power input DC20-30V

Manufacturer

OEM

Manufacturer Details

Warnings & Safety Information
Product Number
M/FME2R.1

Specifications

Number of Channels
2

Number of Channels

Indicates how many different lamps or devices the switch can control independently. For example, a 1-channel switch controls one lighting circuit, while a 4-channel switch can manage up to four different devices from the same unit.

Additional Features

With Remote Control
No

With Remote Control

It allows you to control the switch remotely with a remote control, without needing your smartphone.
Maximum Load
10 A

Maximum Load

It is the maximum amount of current that the switch can withstand without burning out. It shows you how many or how powerful devices you can connect: for simple lights, 10A is enough, while for power-hungry devices (such as a water heater) more Amperes are required.

For example, a typical LED bulb (e.g. 10W) draws very little current, about 0.04 Amperes. This means that a standard smart switch of 10A is more than sufficient for its operation.
Wiring
-
Pieces
1

Features

Dimmer
No

Dimmer

It allows you to adjust the brightness of the lighting instead of simple on/off operation. Bulbs that support dimmable function are required.
Dry Contact
Yes

Dry Contact

Dry Contact. It gives you the ability to safely control devices that have their own power supply. It does not transfer current but allows you to control them remotely, without causing a short circuit or damage.
Consumption Measurement
No

Consumption Measurement

It allows you to see in real time how much electricity your connected device is consuming and to keep a usage history, through your smartphone and the compatible app.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

110,00 €
Free   shipping cost