Skroutz.cy

Flex PD 2G 18.0-EC FC Percussive Drill Driver Battery Brushless 18V 1x5Ah
Power Drill Drivers & Screwdrivers

Flex PD 2G 18.0-EC FC Percussive Drill Driver Battery Brushless 18V 1x5Ah

PD 2G 18.0-EC FC C Cordless Impact Drill Driver 18V (Solo)

Body Only. Battery and charger not included.

Specifications:

  • Nominal voltage: 18 V
  • Maximum torque soft/hard: 56 / 90 Nm
  • No-load speed: 0-600...

PD 2G 18.0-EC FC C Cordless Impact Drill Driver 18V (Solo)

Body Only. Battery and charger not included.

Specifications:

  • Nominal voltage: 18 V
  • Maximum torque soft/hard: 56 / 90 Nm
  • No-load speed: 0-600 min1, 0-2,300 min1
  • No-load impact rate: 9,600-37,000 min1
  • Chuck range: 1.5 - 13 mm
  • Drilling capacity in Steel/Masonry/Wood (mm): 13 / 16 / 60
  • Clutch settings:...
See full description See full description

  • Power Supply

    Battery

    Indicates whether the tool operates on battery or directly from the mains. Battery-powered tools offer freedom of movement, while electric ones provide continuous power.
  • Number of Batteries 1

  • Speed Setting

    Ability to adjust the rotation speed according to the task (low speed for screwing, higher speed for drilling into larger walls, maximum speed for drilling into concrete)

  • Voltage

    It corresponds to the power of the tool. Higher voltage means more power and durability for heavy-duty tasks.

  • Battery Capacity

    The battery capacity. The higher the number, the longer the tool's operating time. An average continuous working time is 20-25 minutes per ah, but it always depends on the type of work we are doing.

  • Maximum Motor Speed

    The maximum rotational speed of the engine in revolutions per minute. For drilling tasks, a number of revolutions up to 1500rpm is perfectly satisfactory, as there is a risk of breaking the drill bit due to the increase in temperature above that level, while for screwing tasks higher speeds can be used, especially if the material is soft such as wood or plasterboard.

  • Chuck Diameter

    The maximum size of drill bit or tip you can use. The larger the chuck, the more accessories it fits.

  • Torque Setting

    The ability to adjust the torque of the tool's operation according to the task at hand. (Low torque for easy screwing/unscrewing, high torque for drilling into walls).

  • Brushless

    The advantage that brushless motors have over brushed ones is that they do not have friction since there are no carbon brushes. Without carbon brushes, the motors are more efficient and have a longer lifespan as there is no wear (the carbon brushes in brushed motors wear out with use). They produce less noise, maintain constant torque at all speeds, do not overheat, and require no maintenance.

    1

    It features a brushless motor that produces less heat and friction, resulting in less wear on the motor and a longer battery life. It also provides more stable power and speed, allowing for smoother and more precise operation. 2. In general, brushless motors are more efficient and have a longer lifespan than motors with brushes, making them a popular choice for electric tools.

  • Impact

    The impact function provides high power to easily and quickly complete even the most demanding tasks.
  • See all

Contents kit

  1. 1x5Ah

    from 226,99 €

  2. Solo

    from 137,43 €

226 99 €
227 Coins 227 Coins
Delivery Wed, 05 Aug - Fri, 07 Aug
Free shipping cost
Sent from Greece
From Techtools
Greece
1 piece
See Power Tools on the page of Techtools
What if it breaks?

You're covered by the statutory 2-year warranty. Contact us and we'll handle the entire process with the store, ensuring your issue is resolved with prompt support through a repair, replacement, or refund.

What if I change my mind?

No problem, as long as it's within 14 days. We'll come pick it up or you can choose the Skroutz Point that suits you, completely free for up to 2 times per year, and we'll refund your money. Get Skroutz Plus to enjoy unlimited free returns.

Product report

Description

Description

PD 2G 18.0-EC FC C Cordless Impact Drill Driver 18V (Solo)

Body Only. Battery and charger not included.

Specifications:

  • Nominal voltage: 18 V
  • Maximum torque soft/hard: 56 / 90 Nm
  • No-load speed: 0-600 min−1, 0-2,300 min−1
  • No-load impact rate: 9,600-37,000 min−1
  • Chuck range: 1.5 - 13 mm
  • Drilling capacity in Steel/Masonry/Wood (mm): 13 / 16 / 60
  • Clutch settings: 24+1
  • LED light: YES
  • Weight (without battery): 1.5 Kg

Description:

Flex cordless impact drill driver with brushless motor (Brushless EC-MOTOR) for greater efficiency and longer lifespan. The electronic management system (EMS) protects the tool, increases performance, and extends its lifespan. Sturdy die-cast aluminum gearbox housing for maximum heat dissipation.

Included:

  • Additional handle
  • Belt clip
  • Bit holder

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Details

Type
Drill Driver

Type

Drill Driver

Suitable for screwing-unscrewing and drilling holes in wood, metal, and various building materials.
Power Source
Battery

Power Source

Battery
Indicates whether the tool operates on battery or directly from the mains. Battery-powered tools offer freedom of movement, while electric ones provide continuous power.
Brushless
Yes

Brushless

The advantage that brushless motors have over brushed ones is that they do not have friction since there are no carbon brushes. Without carbon brushes, the motors are more efficient and have a longer lifespan as there is no wear (the carbon brushes in brushed motors wear out with use). They produce less noise, maintain constant torque at all speeds, do not overheat, and require no maintenance.


It features a brushless motor that produces less heat and friction, resulting in less wear on the motor and a longer battery life. It also provides more stable power and speed, allowing for smoother and more precise operation. 2. In general, brushless motors are more efficient and have a longer lifespan than motors with brushes, making them a popular choice for electric tools.

Battery Features

Number of Batteries
1
Battery Voltage
18 V

Battery Voltage

It corresponds to the power of the tool. Higher voltage means more power and durability for heavy-duty tasks.
Battery Capacity
5 Ah

Battery Capacity

The battery capacity. The higher the number, the longer the tool's operating time. An average continuous working time is 20-25 minutes per ah, but it always depends on the type of work we are doing.

Drilling Abilities

Steel Ø
13 mm

Steel Ø

The maximum possible drilling diameter in metal. The most common diameter for household screws is 6-8mm.
Wood Ø
60 mm
Cement Ø
16 mm

Cement Ø

The maximum possible drilling diameter in cement. The most common diameter for household screws is 6-10mm.

Features & Functions

Maximum Motor Speed
2300 rpm

Maximum Motor Speed

The maximum rotational speed of the engine in revolutions per minute. For drilling tasks, a number of revolutions up to 1500rpm is perfectly satisfactory, as there is a risk of breaking the drill bit due to the increase in temperature above that level, while for screwing tasks higher speeds can be used, especially if the material is soft such as wood or plasterboard.
Speed Adjustment
Yes

Speed Adjustment

Ability to adjust the rotation speed according to the task (low speed for screwing, higher speed for drilling into larger walls, maximum speed for drilling into concrete)
Maximum Torque
90 Nm

Maximum Torque

The maximum power that the tool can deliver to rotate a drill or a screw. Up to 20Nm, we can screw/unscrew small screws that do not require a lot of force to rotate. From 20 to 60Nm, we can perform drilling tasks in addition to screwing. More than 60Nm is mainly encountered in impact drivers that can screw/unscrew screws that require a lot of force to rotate, such as bolts.
Maximum Number of Hits
37000 bpm
Torque Adjustment
Yes

Torque Adjustment

The ability to adjust the torque of the tool's operation according to the task at hand. (Low torque for easy screwing/unscrewing, high torque for drilling into walls).
Percussive
Yes

Percussive

The impact function provides high power to easily and quickly complete even the most demanding tasks.
Angle
No
Interchangeable Head
No
Reception
Quick Change
Maximum Chuck Diameter
13 mm

Maximum Chuck Diameter

The maximum size of drill bit or tip you can use. The larger the chuck, the more accessories it fits.
Net Weight
1500 gr

Extra Features

Carrying Case
Without
Handle Included
Yes
Integrated Light
Yes

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Reviews (1)

Reviews

5.0
1
5.0
Review this product
  1. 1
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product
  • 5
    Stathis_Mpados
    This review is about the contents kit: Solo

    Excellent drill driver. By far the best I have worked with.

    Translated from Greek ·
    • Power
    • Comfortable grip
    • Weight
    • Precision in operation
    • Durability
    • Value for money
    Did you find this review helpful?
Questions

Questions

Do you have a question about the product?

Those users who have this product can help you

Ask for the product

Description & Specifications

PD 2G 18.0-EC FC C Cordless Impact Drill Driver 18V (Solo)

Body Only. Battery and charger not included.

Specifications:

  • Nominal voltage: 18 V
  • Maximum torque soft/hard: 56 / 90 Nm
  • No-load speed: 0-600 min−1, 0-2,300 min−1
  • No-load impact rate: 9,600-37,000 min−1
  • Chuck range: 1.5 - 13 mm
  • Drilling capacity in Steel/Masonry/Wood (mm): 13 / 16 / 60
  • Clutch settings: 24+1
  • LED light: YES
  • Weight (without battery): 1.5 Kg

Description:

Flex cordless impact drill driver with brushless motor (Brushless EC-MOTOR) for greater efficiency and longer lifespan. The electronic management system (EMS) protects the tool, increases performance, and extends its lifespan. Sturdy die-cast aluminum gearbox housing for maximum heat dissipation.

Included:

  • Additional handle
  • Belt clip
  • Bit holder

Manufacturer

Manufacturer Details

Warnings & Safety Information

Product Details

Type
Drill Driver

Type

Drill Driver

Suitable for screwing-unscrewing and drilling holes in wood, metal, and various building materials.
Power Source
Battery

Power Source

Battery
Indicates whether the tool operates on battery or directly from the mains. Battery-powered tools offer freedom of movement, while electric ones provide continuous power.
Brushless
Yes

Brushless

The advantage that brushless motors have over brushed ones is that they do not have friction since there are no carbon brushes. Without carbon brushes, the motors are more efficient and have a longer lifespan as there is no wear (the carbon brushes in brushed motors wear out with use). They produce less noise, maintain constant torque at all speeds, do not overheat, and require no maintenance.


It features a brushless motor that produces less heat and friction, resulting in less wear on the motor and a longer battery life. It also provides more stable power and speed, allowing for smoother and more precise operation. 2. In general, brushless motors are more efficient and have a longer lifespan than motors with brushes, making them a popular choice for electric tools.

Battery Features

Number of Batteries
1
Battery Voltage
18 V

Battery Voltage

It corresponds to the power of the tool. Higher voltage means more power and durability for heavy-duty tasks.
Battery Capacity
5 Ah

Battery Capacity

The battery capacity. The higher the number, the longer the tool's operating time. An average continuous working time is 20-25 minutes per ah, but it always depends on the type of work we are doing.

Drilling Abilities

Steel Ø
13 mm

Steel Ø

The maximum possible drilling diameter in metal. The most common diameter for household screws is 6-8mm.
Wood Ø
60 mm
Cement Ø
16 mm

Cement Ø

The maximum possible drilling diameter in cement. The most common diameter for household screws is 6-10mm.

Features & Functions

Maximum Motor Speed
2300 rpm

Maximum Motor Speed

The maximum rotational speed of the engine in revolutions per minute. For drilling tasks, a number of revolutions up to 1500rpm is perfectly satisfactory, as there is a risk of breaking the drill bit due to the increase in temperature above that level, while for screwing tasks higher speeds can be used, especially if the material is soft such as wood or plasterboard.
Speed Adjustment
Yes

Speed Adjustment

Ability to adjust the rotation speed according to the task (low speed for screwing, higher speed for drilling into larger walls, maximum speed for drilling into concrete)
Maximum Torque
90 Nm

Maximum Torque

The maximum power that the tool can deliver to rotate a drill or a screw. Up to 20Nm, we can screw/unscrew small screws that do not require a lot of force to rotate. From 20 to 60Nm, we can perform drilling tasks in addition to screwing. More than 60Nm is mainly encountered in impact drivers that can screw/unscrew screws that require a lot of force to rotate, such as bolts.
Maximum Number of Hits
37000 bpm
Torque Adjustment
Yes

Torque Adjustment

The ability to adjust the torque of the tool's operation according to the task at hand. (Low torque for easy screwing/unscrewing, high torque for drilling into walls).
Percussive
Yes

Percussive

The impact function provides high power to easily and quickly complete even the most demanding tasks.
Angle
No
Interchangeable Head
No
Reception
Quick Change
Maximum Chuck Diameter
13 mm

Maximum Chuck Diameter

The maximum size of drill bit or tip you can use. The larger the chuck, the more accessories it fits.
Net Weight
1500 gr

Extra Features

Carrying Case
Without
Handle Included
Yes
Integrated Light
Yes

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (1)

5.0
1
5.0
Review this product
  1. 1
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product
  • 5
    Stathis_Mpados
    This review is about the contents kit: Solo

    Excellent drill driver. By far the best I have worked with.

    Translated from Greek ·
    • Power
    • Comfortable grip
    • Weight
    • Precision in operation
    • Durability
    • Value for money
    Did you find this review helpful?
226,99 €
Free   shipping cost