High-quality 100% acrylic water-based special paint for hives. It is completely friendly to the colony, user, and the environment. It offers excellent gloss and resistance to yellowing, while being odorless during application due to its very low content of volatile organic solvents (VOC). It can be applied to all types of old and new hives.

Coverage: 12-15m² / Lt on properly prepared surfaces

Surface preparation:

• The surface to be painted must be cleaned of dust, grease, oils, peeling old paint, rust, mold residues, or moisture.
• Prime the surface with the recommended primer for the product (Velatura water-based).
• Shake the product well and apply it to the surface.
• The product gains all its mechanical strengths after 20 - 30 days.

Application conditions: Avoid applying the product at temperatures below 6°C and above 40°C and when the relative humidity is greater than 80%. Adverse conditions during application can alter the final properties of the paint.

Application tools:

• Brush
• Roller
• Spray gun

During work, keep the tools "wet" in the container. Drain the product well from the tools and clean them immediately with warm water and soap. If the product dries, it can only be removed with strong detergents. Do not dispose of washing liquids in the groundwater.

Warning: Wear protective gloves, protective clothing, personal protective equipment for eyes and face. In case of contact with the eyes, rinse carefully with plenty of water for several minutes. If contact lenses are present, remove them if easy to do so. Continue rinsing.