Special Cell Paint, 100% acrylic and water-soluble, suitable for all old and new beehives. It is friendly to the colony, the user, and the environment, providing excellent gloss and resistance to yellowing. At the same time, it is odorless during application due to its very low content of volatile organic solvents (VOC).

Coverage: 12-15m2 / Lt on suitably prepared surfaces.

Surface preparation:

• Clean the surface of dust, grease, oils, peeling old paints, rust, mold residues, or moisture.
• Prime the surface with the recommended primer of the product (Water-based Velatura).
• Shake the product well and apply to the surface.
• It gains all its mechanical strengths after 20 - 30 days.

Application conditions: Avoid application at temperatures below 6°C and above 40°C and when the relative humidity is greater than 80%. Adverse conditions during application may alter the final properties of the paint.

Application tools:

• Brush
• Roller
• Spray gun

During work, keep the tools "wet" inside the container. Drain the product well from the tools and clean them immediately with warm water and soap. If the product dries, it can only be removed with strong detergents. Do not dispose of washing liquids into the groundwater.

Warning: Wear protective gloves, protective clothing, and personal protective equipment for the eyes and face. In case of contact with the eyes, rinse carefully with plenty of water for several minutes. If contact lenses are worn, remove them if easy. Continue rinsing.