Special general-purpose cleaning product, slightly alkaline.

The MF-10 deeply cleans old layers of oil, grease, and stubborn stains. It removes fine layers of cement from polished marbles and limestones, as well as construction dirt from new coatings.

Fields of Application:

• Suitable for marbles, granites, natural and artificial stones.
• Concrete surfaces.
• For indoor and outdoor use.

Note: In case drops of the material fall on sensitive surfaces such as varnished wood, carpets, etc., rinse immediately with plenty of water.

Instructions for Use: Dilute the MF-10 up to 1:5 and apply with a brush. Let it act for about 10-20 minutes, brushing periodically. Do not let it dry. Rinse thoroughly with plenty of water. For particularly difficult stains, repeat the process and/or use undiluted. The product should not be applied in direct sunlight or at temperatures above 25°C. It is recommended to test a small section of the surface before application.

Coverage: Approximately 5-10m² / lt, depending on the type of stain.

Packaging: 1 – 5 and 10 liters. Available upon request in 30 liters.

Produced in Germany.