Sign up in one tap with Google, Apple or Facebook
The Zapco car amplifier features 12 channels and a Cirrus Logic CS47048 DSP processor. Amplifier output is 12 × 80 W at 4 Ω or 12 × 120 W at 2 Ω, while bridged output is 6 × 240 W at 4 Ω.
The DSP supports time alignment in 0.02 ms increments and a maximum delay of 515 cm. Connect to a computer or display via USB or a 6-pin Mini DIN.
- Channels: 12
- Amplifier class: A
- DSP processor: Cirrus Logic CS47048, 150 MHz / 32 bit / 192 KHz
- ADC converter: Cirrus Logic CS47048, 32 bit / 192 KHz
- ADC dynamic range / THD: 108 dB / -98 dB
- DAC converter: Cirrus Logic CS47048, 32 bit / 192 KHz
- DAC dynamic range / THD: 140 dB / -120 dB
- Low-level input sensitivity: 1–5 VRMS
- High-level input sensitivity: 2–20 V
- Optical digital input: 24 bit / 192 KHz
- Coaxial digital input: 24 bit / 192 KHz
- Frequency response: 10 Hz–22.5 KHz (-3 dB)
- Input signal-to-noise ratio: 110 dBA (D) / 106 dBA (A)
- Amplifier and DSP signal-to-noise ratio: 95 dBA at maximum output
- Input THD+N: 0.002% (D) / 0.005% (A)
- Amplifier and DSP THD+N with analog input: 0.07%
- DSP crosstalk at 1 kHz: 90 dB
- Amplifier and DSP crosstalk: 45 dB
- Power at 4 Ω: 12 × 80 W
- Power at 2 Ω: 12 × 120 W
- Bridged power at 4 Ω: 6 × 240 W
- Front/rear balance: Channels 1–6, group and individual adjustment, 31 positions
- Effects balance: Channels 7–8, group and individual adjustment, 11 positions
- Channel mute and isolation: Available for each channel
- Time alignment: 0–15 ms, 0.02 ms increments
- Maximum delay: 515 cm, 0.68 cm increments
- Polarity: 0° / 180°
- Remote control: Included
- HD-BT streaming: With optional HD-BT II-D
- Computer/display connection: USB / 6-pin Mini DIN
- Dimensions: 213 × 291 × 50 mm
- Number of Channels
- 12 channels
- Output Power (4 Ohm)
- -
- Amplifier class
- A
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.