Skroutz.cy

Sherman DigiTig 200MTM Welding Machine MAG / MIG / MMA / TIG with Maximum Welding Current 200A and Duty Cycle 60%
Welding Machines

Sherman DigiTig 200MTM Welding Machine MAG / MIG / MMA / TIG with Maximum Welding Current 200A and Duty Cycle 60%

The synergic welder DIGIMIG 200 MTM is a device for manual welding of steel and non-ferrous metals using MIG / MAG, MMA (coated electrode), and TIG HF methods.

The device is intended for professionals...

The synergic welder DIGIMIG 200 MTM is a device for manual welding of steel and non-ferrous metals using MIG / MAG, MMA (coated electrode), and TIG HF methods.

The device is intended for professionals who value high quality and reliability. It can also be used for brazing thin (up to 3 mm) galvanized sheets.

Digital control allows full adjustment of...

See full description See full description

  • Welding Current

    200

    Suitable for professional use on thick metals, such as steel or cast iron constructions.

  • Duty Cycle

    The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

    2.

    For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.

  • Power Supply Voltage

    230

    It is the supply voltage that the machine requires from the electrical grid.

  • Power

    7.4

    Affects the power consumption of the machine and determines if it can be supported by the electrical network you are using.
  • See all
600 16 €
601 Coins 601 Coins
Delivery Tue, 04 Aug - Thu, 06 Aug
38,00 € shipping cost
Delivery Wed, 12 Aug - Fri, 14 Aug
32,00 € shipping cost
Do you want it with 33,00 € shipping?
Sent from Greece
From Oxytools
Greece
10 pieces
See Tools on the page of Oxytools
What if it breaks?

You're covered by the statutory 2-year warranty. Contact us and we'll handle the entire process with the store, ensuring your issue is resolved with prompt support through a repair, replacement, or refund.

What if I change my mind?

No problem, as long as it's within 14 days. We'll come pick it up or you can choose the Skroutz Point that suits you, completely free for up to 2 times per year, and we'll refund your money. Get Skroutz Plus to enjoy unlimited free returns.

Review the product
Product report

Description

Description

The synergic welder DIGIMIG 200 MTM is a device for manual welding of steel and non-ferrous metals using MIG / MAG, MMA (coated electrode), and TIG HF methods.

The device is intended for professionals who value high quality and reliability. It can also be used for brazing thin (up to 3 mm) galvanized sheets.

Digital control allows full adjustment of parameters, arc dynamics, characteristics, and manual or synergic operation mode in the MIG / MAG method.

The use of synergic settings on the welder for ordinary steel, stainless steel, and aluminum alloys significantly simplifies its operation and allows it to be used by less experienced users and hobbyists.

When welding with MMA, you can adjust the HOT START, ARC FORCE functions and disable the VRD.

The welder allows the use of multiple operating modes, including spot welding selection.

The device has a last setting memory, meaning after turning it off and on again, the parameters of the last setting are restored.

It is also possible to store 10 sets of settings with easy access to the save/restore program function.

TECHNICAL SPECIFICATIONS:
  • Power supply voltage: 230V 50Hz
  • Maximum power consumption: 7.4 kVA
  • No-load voltage: 65V
  • Rated welding current / duty cycle MIG: 200A / 60%; MMA: 180A / 60%; TIG: 200A / 60%
  • Welding current adjustment range MIG: 30 - 200 A; MMA: 20 - 180 A; TIG: 10 - 200 A.
  • Welding voltage adjustment range (MIG): 15.5 - 24 V
  • Welding voltage correction: -20 - +20%
  • Inductance: 0 -10
  • Gas pre-flow: 0 - 3 sec
  • Gas post-flow: 0 - 9.9 sec
  • Ramp current: 0 - 9.9 s
  • Current downslope: 0 - 9.9 sec
  • Crater current: 10 - 200 A.
  • Pulse frequency: 0.2 - 99 Hz
  • Pulse width: 10 - 90%
  • Wire burn-back: 0 - 1 sec
  • TIG spot welding time: 0.01-5 s; MIG 0.5 - 5 sec
  • TIG SPOT welding pause time: 0.1-5 s; MIG 0.5 - 5 sec
  • Adjustable ARC FORCE range (MMA): 0 - 100 A.
  • HOT START adjustment range (MMA): 0 - 100 A.
  • Weight [kg]: 11.5
  • Dimensions (L x W x H) [mm]: 420 x 200 x 375

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Type
MAG, MIG, MMA, TIG

Type

MIG

The easiest welding method even for a beginner. 2. If the wire to be used does not have a special coating (flux), it should be connected to an external gas cylinder (e.g. argon, CO2).

MMA

Creates thick and strong bonds without the need for external gas supply, making it ideal for out-of-lab welding.

TIG

Slow welding for detailed work on aluminum and stainless steel, mainly. Requires experience and connection to an external gas cylinder. Does not create "spatters".
Welding Current (max)
200 A

Welding Current (max): 200


Suitable for professional use on thick metals, such as steel or cast iron constructions.
Operation Cycle (max Ampere)
60 %

Operation Cycle (max Ampere)

The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

2.

For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.
Supply Voltage
230 V

Supply Voltage: 230


It is the supply voltage that the machine requires from the electrical grid.
Power
7.4 kVA

Power: 7.4


Affects the power consumption of the machine and determines if it can be supported by the electrical network you are using.

Additional Features

Inverter
No
IGBT
No
VRD
Yes

VRD


It is a voltage reduction device used in welding machines to improve user safety.
with Voltage Stabilizer
No
for Generator with AVR
No

Features

Hot Start
Yes

Hot Start


Temporarily increases the current intensity at the moment of welding initiation.
Anti Stick
No
Arc Force
Yes

Arc Force


Helps in the stability of the arc during welding.
2T Operation
No
4T Mode
No
Spot Function
No
Pulsed
Yes

Pulsed


Instead of remaining constant during welding, the current increases and decreases in pulses at specified time intervals.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications
Questions

Questions

Do you have a question about the product?

1 user has this product and can help you

Ask for the product

Description & Specifications

The synergic welder DIGIMIG 200 MTM is a device for manual welding of steel and non-ferrous metals using MIG / MAG, MMA (coated electrode), and TIG HF methods.

The device is intended for professionals who value high quality and reliability. It can also be used for brazing thin (up to 3 mm) galvanized sheets.

Digital control allows full adjustment of parameters, arc dynamics, characteristics, and manual or synergic operation mode in the MIG / MAG method.

The use of synergic settings on the welder for ordinary steel, stainless steel, and aluminum alloys significantly simplifies its operation and allows it to be used by less experienced users and hobbyists.

When welding with MMA, you can adjust the HOT START, ARC FORCE functions and disable the VRD.

The welder allows the use of multiple operating modes, including spot welding selection.

The device has a last setting memory, meaning after turning it off and on again, the parameters of the last setting are restored.

It is also possible to store 10 sets of settings with easy access to the save/restore program function.

TECHNICAL SPECIFICATIONS:
  • Power supply voltage: 230V 50Hz
  • Maximum power consumption: 7.4 kVA
  • No-load voltage: 65V
  • Rated welding current / duty cycle MIG: 200A / 60%; MMA: 180A / 60%; TIG: 200A / 60%
  • Welding current adjustment range MIG: 30 - 200 A; MMA: 20 - 180 A; TIG: 10 - 200 A.
  • Welding voltage adjustment range (MIG): 15.5 - 24 V
  • Welding voltage correction: -20 - +20%
  • Inductance: 0 -10
  • Gas pre-flow: 0 - 3 sec
  • Gas post-flow: 0 - 9.9 sec
  • Ramp current: 0 - 9.9 s
  • Current downslope: 0 - 9.9 sec
  • Crater current: 10 - 200 A.
  • Pulse frequency: 0.2 - 99 Hz
  • Pulse width: 10 - 90%
  • Wire burn-back: 0 - 1 sec
  • TIG spot welding time: 0.01-5 s; MIG 0.5 - 5 sec
  • TIG SPOT welding pause time: 0.1-5 s; MIG 0.5 - 5 sec
  • Adjustable ARC FORCE range (MMA): 0 - 100 A.
  • HOT START adjustment range (MMA): 0 - 100 A.
  • Weight [kg]: 11.5
  • Dimensions (L x W x H) [mm]: 420 x 200 x 375

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
MAG, MIG, MMA, TIG

Type

MIG

The easiest welding method even for a beginner. 2. If the wire to be used does not have a special coating (flux), it should be connected to an external gas cylinder (e.g. argon, CO2).

MMA

Creates thick and strong bonds without the need for external gas supply, making it ideal for out-of-lab welding.

TIG

Slow welding for detailed work on aluminum and stainless steel, mainly. Requires experience and connection to an external gas cylinder. Does not create "spatters".
Welding Current (max)
200 A

Welding Current (max): 200


Suitable for professional use on thick metals, such as steel or cast iron constructions.
Operation Cycle (max Ampere)
60 %

Operation Cycle (max Ampere)

The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

2.

For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.
Supply Voltage
230 V

Supply Voltage: 230


It is the supply voltage that the machine requires from the electrical grid.
Power
7.4 kVA

Power: 7.4


Affects the power consumption of the machine and determines if it can be supported by the electrical network you are using.

Additional Features

Inverter
No
IGBT
No
VRD
Yes

VRD


It is a voltage reduction device used in welding machines to improve user safety.
with Voltage Stabilizer
No
for Generator with AVR
No

Features

Hot Start
Yes

Hot Start


Temporarily increases the current intensity at the moment of welding initiation.
Anti Stick
No
Arc Force
Yes

Arc Force


Helps in the stability of the arc during welding.
2T Operation
No
4T Mode
No
Spot Function
No
Pulsed
Yes

Pulsed


Instead of remaining constant during welding, the current increases and decreases in pulses at specified time intervals.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

600,16 €
38,00 € 43,00 €   shipping cost