The Milesight MS-N5016-NPE NVR supports 16 channels and connects up to 16 network cameras via PoE ports. It records at resolutions up to 8 MP and supports H.265+/H.265 (HEVC)/H.264+/H.264 compression, as well as dual streaming. The HDMI output supports resolutions up to 3840 × 2160 at 30 Hz, and a VGA output is also available.
The two SATA bays accept 3.5" hard drives with capacities of up to 10 TB each. Recording can be continuous or triggered by an event, such as motion detection or an alarm. The built-in Linux operating system supports a graphical settings interface and multiple user levels.
- Type: NVR
- Input channels: 16
- Transmission rate: 160 Mbps
- Bandwidth: 80 Mbps incoming, 50 Mbps outgoing
- Recording resolution: 8 MP, 6 MP, 5 MP, 4 MP, 3 MP, 1080P, UXGA, 720P, D1, VGA, CIF, QCIF
- HDMI resolution: 3840 × 2160 at 30 Hz, 1920 × 1080 at 60 Hz
- VGA resolution: 1920 × 1080 at 60 Hz
- Network camera support: Up to 32 cameras at resolutions up to 720P
- PoE ports: 16
- USB ports: 2 × USB 2.0
- Network port: 1 × RJ45 10/100/1000 Mbps
- HDD bays: 2 × SATA for 3.5" drives
- Maximum capacity per drive: 10 TB
- Video compression: H.265+/H.265 (HEVC)/H.264+/H.264
- Audio formats: G.711, AAC, G.722, G.726
- Recording: Continuous or event-based (motion detection, alarm)
- Playback: General playback, event playback
- Network protocols: IPv4/IPv6, TCP, UDP
- Operating system: Linux
Specifications
- Type
- NVR
- Resolution
- 4K
- WiFi
- No
- Number of POE
- 16
- Gigabit Port
- No
- Ports
- PoE, HDMI, USB
- ONVIF
- No
Smart AI Detection
- Human Detection
- No
- Vehicle Detection
- No
HDD
- HDD Slots
- 2
- Maximum Capacity per Disk
- 10 TB
- Includes Hard Drive
- No
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.