Skroutz.cy

Submersible Pump Shredder Float Ddt Wqd10 2600w
Submersible Water Pumps

Submersible Pump Shredder Float Ddt Wqd10 2600w

Selection of Water Pump Based on the Impurities Present at the Source

In the naming of Dawer products, you will find terms that indicate the efficiency of the pump depending on the type of water...

Selection of Water Pump Based on the Impurities Present at the Source

In the naming of Dawer products, you will find terms that indicate the efficiency of the pump depending on the type of water source you have. For clean water, pumps have a single purpose: to collect and transfer water for consumption.

Things change when the water source contains large...

See full description See full description

  • Horsepower

    Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).

  • Voltage

    Single-Phase

    Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 

  • Power

    It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.

  • Manometric Height

    8

    The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

    • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
    • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
  • See all
The product is not available for shipping to the selected country.
Review the product
Product report

Description

Description

Selection of Water Pump Based on the Impurities Present at the Source

In the naming of Dawer products, you will find terms that indicate the efficiency of the pump depending on the type of water source you have. For clean water, pumps have a single purpose: to collect and transfer water for consumption.

Things change when the water source contains large impurities. In order to transfer and remove impurities from various areas, they must be shredded before being pumped to the surface.

A submersible pump designed for clean water will not be effective in a source with dirty water and will wear out quickly.

Submersible pumps for dirty water with a shredder are ideal for removing waste from septic tanks or even in agriculture, in areas with water containing solid bodies.

Why choose a DDT submersible pump with shredder and float switch?

The DDT submersible pump with shredder and float switch is suitable for dirty water sources. Depending on the quantity and size of impurities, you should choose a pump with one or two shredders. Their role is to absorb large particulate matter and pump the water to the surface without overloading the motor.

Submersible pumps with shredders are suitable for pumping waste from septic tanks to the sewer or for removing dirty water from various areas. They are also used for emptying toilets or removing water from flooded basements.

The DDT submersible pump model with shredder and float switch has a long lifespan, supported by the motor housing made of cast iron.

Cast iron is known for its resistance to waste and corrosion. The use of these materials gives the pump long-term durability and efficiency.

  • Use: Domestic
  • Motor Power: 2600 W
  • Supply Voltage: 220 V
  • Maximum Speed (rpm): 2860 rpm
  • Color: Blue
  • Weight: 12 kg
  • Pump Type: Submersible pump
  • Material: Cast iron
  • Fuel Type: Electricity
  • Current Type: Single-phase
  • Starting Type: Automatic
  • Package Contents: 1 x Submersible pump
  • Motor Type: Electric
  • Protection Class: ICL B
  • Maximum Temperature: 35°C
  • Discharge Connection Diameter: 2 inches
  • Suction Connection Diameter: 2 inches
  • Maximum Flow: 8 m³/h
  • Suction Depth: 8 m
  • Height: 40 cm
  • Diameter: 270 mm
  • Cable Length: 8 m

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Voltage
Single-Phase

Voltage

Single-Phase

Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 
Horsepower
3.46 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
2595 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Cable Length
8 m
Motor Rotation Speed
2860 rpm

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
Yes

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
Yes

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
8 m

Maximum Head Height: 8


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Maximum Output
8 m³/h

Maximum Output

The maximum output or flow of a submersible water pump, as defined by the manufacturers, is the maximum amount of water the pump can move under ideal conditions, usually with zero head (i.e., no lift resistance).
Pump Submersion Depth
8 m
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications
Questions

Questions

Do you have a question about the product?

1 user has this product and can help you

Ask for the product

Description & Specifications

Selection of Water Pump Based on the Impurities Present at the Source

In the naming of Dawer products, you will find terms that indicate the efficiency of the pump depending on the type of water source you have. For clean water, pumps have a single purpose: to collect and transfer water for consumption.

Things change when the water source contains large impurities. In order to transfer and remove impurities from various areas, they must be shredded before being pumped to the surface.

A submersible pump designed for clean water will not be effective in a source with dirty water and will wear out quickly.

Submersible pumps for dirty water with a shredder are ideal for removing waste from septic tanks or even in agriculture, in areas with water containing solid bodies.

Why choose a DDT submersible pump with shredder and float switch?

The DDT submersible pump with shredder and float switch is suitable for dirty water sources. Depending on the quantity and size of impurities, you should choose a pump with one or two shredders. Their role is to absorb large particulate matter and pump the water to the surface without overloading the motor.

Submersible pumps with shredders are suitable for pumping waste from septic tanks to the sewer or for removing dirty water from various areas. They are also used for emptying toilets or removing water from flooded basements.

The DDT submersible pump model with shredder and float switch has a long lifespan, supported by the motor housing made of cast iron.

Cast iron is known for its resistance to waste and corrosion. The use of these materials gives the pump long-term durability and efficiency.

  • Use: Domestic
  • Motor Power: 2600 W
  • Supply Voltage: 220 V
  • Maximum Speed (rpm): 2860 rpm
  • Color: Blue
  • Weight: 12 kg
  • Pump Type: Submersible pump
  • Material: Cast iron
  • Fuel Type: Electricity
  • Current Type: Single-phase
  • Starting Type: Automatic
  • Package Contents: 1 x Submersible pump
  • Motor Type: Electric
  • Protection Class: ICL B
  • Maximum Temperature: 35°C
  • Discharge Connection Diameter: 2 inches
  • Suction Connection Diameter: 2 inches
  • Maximum Flow: 8 m³/h
  • Suction Depth: 8 m
  • Height: 40 cm
  • Diameter: 270 mm
  • Cable Length: 8 m

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Voltage
Single-Phase

Voltage

Single-Phase

Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 
Horsepower
3.46 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
2595 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Cable Length
8 m
Motor Rotation Speed
2860 rpm

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
Yes

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
Yes

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
8 m

Maximum Head Height: 8


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Maximum Output
8 m³/h

Maximum Output

The maximum output or flow of a submersible water pump, as defined by the manufacturers, is the maximum amount of water the pump can move under ideal conditions, usually with zero head (i.e., no lift resistance).
Pump Submersion Depth
8 m
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.