Skroutz.cy

Deep Well Submersible Water Pump Ddt Qjd120-1.5 1500 W Stainless Steel 8 Turbines
Submersible Water Pumps

Deep Well Submersible Water Pump Ddt Qjd120-1.5 1500 W Stainless Steel 8 Turbines

Key features:

  • Powerful 1500W motor
  • Maximum head 120m
  • Stainless steel Inox construction
  • 8 impellers for high pressure

Ensure a steady supply of clean water from great depths of up to 120 m with the durable DDT 1500W submersible pump.

See full description

Top specs

  • Voltage

    Single-Phase

    Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 

  • Power

    It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.

  • Manometric Height

    120

    The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

    • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
    • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
  • See all
The product is not available for shipping to the selected country.
Product report

Description

Description

At a glance

  • High Performance: 1500W power and an 8-impeller system for effortless pumping from depths of up to 120 meters.
  • Durable Materials: Stainless steel body and cast iron components that guarantee protection against corrosion.

Top pressure and pumping from great depths

You fully cover the water supply needs of your home, garden, or business, even from very deep wells or boreholes. The DDT QJD120-1.5 submersible pump is equipped with a powerful 1500W electric motor (220V) and 8 high-pressure impellers, achieving an impressive maximum head of up to 120 meters and a maximum flow rate reaching 7 m³/h.

Sturdy Inox construction for maximum lifespan

You are investing in a machine built to operate flawlessly underwater for years. The combination of stainless steel and cast iron provides complete protection against rust and wear. With top-tier IP68 protection class, automatic start type, and an integrated 15-meter power cable, the pump guarantees safe and efficient operation in water temperatures up to 35°C.

Specifications

  • Model: QJD120-1.5
  • Pump Type: Submersible deep well / borehole
  • Motor Power: 1500 W
  • Supply Voltage: 220 V (Single-phase current)
  • Maximum Speed: 2860 rpm
  • Maximum Head / Pumping Depth: 120 m
  • Maximum Flow Rate: 7 m³/h
  • Number of Impellers: 8
  • Construction Materials: Stainless steel (Inox) & Cast iron
  • Outlet Connection Diameter: 1.5 inch (Reduction to 1" recommended)
  • Protection Class: IP 68
  • Maximum Water Temperature: 35 °C
  • Cable Length: 15 m
  • Pump Dimensions: Height 90 cm / Diameter 100 mm
  • Weight: 13 kg

Note: The pump has a 1.5" outlet but requires the use of a reduction to 1 inch (1") for optimal and recommended operation.

Package Contents & Information

  • 1 x Submersible Pump DDT 1500W

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Type
Well

Type

Well
They are designed to pump water from underground sources when the water is at a depth, and are mainly used for water supply, irrigation, and other applications in areas that do not have easy access to surface water.
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Voltage
Single-Phase

Voltage

Single-Phase

Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 
Power
1500 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Cable Length
15 m
Motor Rotation Speed
2860 rpm

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
No

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Outlet Nozzle
1", 1 1/2"

Outlet Nozzle

The outlet nozzle refers to the point or the external diameter of the pump from which the pumped water or liquid exits. It is an important feature for determining the connection of the pump with the piping system and affects the flow capacity of the liquid.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
120 m

Maximum Head Height: 120


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Maximum Output
7 m³/h

Maximum Output

The maximum output or flow of a submersible water pump, as defined by the manufacturers, is the maximum amount of water the pump can move under ideal conditions, usually with zero head (i.e., no lift resistance).
Pump Submersion Depth
120 m
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
Yes
Protection Certification
IP68

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Reviews (1)

Reviews

5.0
1
5.0
Review this product
  1. 1
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product
  • Tolis_Siozios
    5
    Tolis_Siozios

    Verified purchase

    It is very good. For the money it costs, it is more than good. It has pressure and a large water flow. I don't know if it delivers 7 cubic meters per hour because I didn't measure it, but it does deliver a lot of water

    Translated from Greek ·
    Did you find this review helpful?
  • Tolis_Siozios
    5
    Tolis_Siozios

    It is very good. For the money it costs, it is more than good. It has pressure and a large water flow. I don't know if it delivers 7 cubic meters per hour because I didn't measure it, but it does deliver a lot of water

    Translated from Greek ·
    0
  • See all
Questions (1)

Questions

8 users have this product and can help you

Ask for the product
nikos_papadopoulos1574682724

Ενδιαφέρομαι για την αντλια αλλα εχω τον εξής ενδοιασμό. Θα φέρω άνθρωπο να την τοποθετήσει. Αν πάθει κατι μεσα στα 2 Χρόνια τι γίνεται με την εγγύηση; Ποιος θα την βγάλει απο το πηγάδι να την επισκευάσει και μετα να την ξαναβάλει; Απο Αυτά τι καλύπτετε;

nikos_papadopoulos1574682724 2026-05-21
0 Replies Reply to
See all questions (1)

Description & Specifications

At a glance

  • High Performance: 1500W power and an 8-impeller system for effortless pumping from depths of up to 120 meters.
  • Durable Materials: Stainless steel body and cast iron components that guarantee protection against corrosion.

Top pressure and pumping from great depths

You fully cover the water supply needs of your home, garden, or business, even from very deep wells or boreholes. The DDT QJD120-1.5 submersible pump is equipped with a powerful 1500W electric motor (220V) and 8 high-pressure impellers, achieving an impressive maximum head of up to 120 meters and a maximum flow rate reaching 7 m³/h.

Sturdy Inox construction for maximum lifespan

You are investing in a machine built to operate flawlessly underwater for years. The combination of stainless steel and cast iron provides complete protection against rust and wear. With top-tier IP68 protection class, automatic start type, and an integrated 15-meter power cable, the pump guarantees safe and efficient operation in water temperatures up to 35°C.

Specifications

  • Model: QJD120-1.5
  • Pump Type: Submersible deep well / borehole
  • Motor Power: 1500 W
  • Supply Voltage: 220 V (Single-phase current)
  • Maximum Speed: 2860 rpm
  • Maximum Head / Pumping Depth: 120 m
  • Maximum Flow Rate: 7 m³/h
  • Number of Impellers: 8
  • Construction Materials: Stainless steel (Inox) & Cast iron
  • Outlet Connection Diameter: 1.5 inch (Reduction to 1" recommended)
  • Protection Class: IP 68
  • Maximum Water Temperature: 35 °C
  • Cable Length: 15 m
  • Pump Dimensions: Height 90 cm / Diameter 100 mm
  • Weight: 13 kg

Note: The pump has a 1.5" outlet but requires the use of a reduction to 1 inch (1") for optimal and recommended operation.

Package Contents & Information

  • 1 x Submersible Pump DDT 1500W

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
Well

Type

Well
They are designed to pump water from underground sources when the water is at a depth, and are mainly used for water supply, irrigation, and other applications in areas that do not have easy access to surface water.
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Voltage
Single-Phase

Voltage

Single-Phase

Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 
Power
1500 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Cable Length
15 m
Motor Rotation Speed
2860 rpm

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
No

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Outlet Nozzle
1", 1 1/2"

Outlet Nozzle

The outlet nozzle refers to the point or the external diameter of the pump from which the pumped water or liquid exits. It is an important feature for determining the connection of the pump with the piping system and affects the flow capacity of the liquid.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
120 m

Maximum Head Height: 120


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Maximum Output
7 m³/h

Maximum Output

The maximum output or flow of a submersible water pump, as defined by the manufacturers, is the maximum amount of water the pump can move under ideal conditions, usually with zero head (i.e., no lift resistance).
Pump Submersion Depth
120 m
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
Yes
Protection Certification
IP68

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (1)

5.0
1
5.0
Review this product
  1. 1
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product
  • Tolis_Siozios
    5
    Tolis_Siozios

    Verified purchase

    It is very good. For the money it costs, it is more than good. It has pressure and a large water flow. I don't know if it delivers 7 cubic meters per hour because I didn't measure it, but it does deliver a lot of water

    Translated from Greek ·
    Did you find this review helpful?
  • Tolis_Siozios
    5
    Tolis_Siozios

    It is very good. For the money it costs, it is more than good. It has pressure and a large water flow. I don't know if it delivers 7 cubic meters per hour because I didn't measure it, but it does deliver a lot of water

    Translated from Greek ·
    0
  • See all