Skroutz.cy

Submersible Pump Dual Grinder Dirty Water DDT V370T Stainless Steel
Submersible Water Pumps

Submersible Pump Dual Grinder Dirty Water DDT V370T Stainless Steel

Introducing the submersible pump with double blade for dirty water, DDT, V370T, made of Stainless Steel, a product that belongs to the professional DDT series. This pump is one of the most efficient...

Introducing the submersible pump with double blade for dirty water, DDT, V370T, made of Stainless Steel, a product that belongs to the professional DDT series. This pump is one of the most efficient systems for pumping water from dirty sources.

Main advantages of the DDT submersible pump with double blade for dirty water:

  • Compact size: The pump can be used...
See full description See full description

Top specs

  • Horsepower

    Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).

  • Voltage

    Single-Phase

    Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 

  • Power

    It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.

  • Manometric Height

    10

    The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

    • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
    • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
  • See all
The product is not available for shipping to the selected country.
Product report

Description

Description

Introducing the submersible pump with double blade for dirty water, DDT, V370T, made of Stainless Steel, a product that belongs to the professional DDT series. This pump is one of the most efficient systems for pumping water from dirty sources.

Main advantages of the DDT submersible pump with double blade for dirty water:

  • Compact size: The pump can be used in hard-to-reach spaces, ideal for drains, cesspools, and toilets.
  • Long lifespan: The motor of the pump is made of solid copper, resistant to corrosion and mechanical stress.
  • Versatility: It can be used for both residential and commercial purposes, suitable for pumping dirty water.

Specifications:

  • Motor power: 370 W
  • Supply voltage: 220 V
  • Maximum speed: 2860 rpm
  • Color: Stainless Steel
  • Weight: 7 kg
  • Type of pump: Submersible pump
  • Material: Stainless Steel
  • Fuel type: Electricity
  • Current type: Single-phase
  • Starting type: Automatic
  • Package contents: 1 x Submersible pump
  • Motor type: Electric
  • Protection class: ICL B
  • Maximum temperature: 35°C
  • Outlet connection diameter: 1 inch
  • Inlet connection diameter: 1 inch
  • Maximum flow: 6 m³/h
  • Discharge height: 10 m
  • Suction depth: 7 m
  • Height: 40 cm
  • Diameter: 170 mm
  • Cable length: 8 m

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Voltage
Single-Phase

Voltage

Single-Phase

Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 
Horsepower
0.49 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
367.5 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Cable Length
10 m
Motor Rotation Speed
2860 rpm

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
No

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Outlet Nozzle
1"

Outlet Nozzle

The outlet nozzle refers to the point or the external diameter of the pump from which the pumped water or liquid exits. It is an important feature for determining the connection of the pump with the piping system and affects the flow capacity of the liquid.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
10 m

Maximum Head Height: 10


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Maximum Output
6 m³/h

Maximum Output

The maximum output or flow of a submersible water pump, as defined by the manufacturers, is the maximum amount of water the pump can move under ideal conditions, usually with zero head (i.e., no lift resistance).
Pump Submersion Depth
10 m
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
Yes

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Reviews (1)

Reviews

5.0
1
5.0
Review this product
  1. 1
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product
Questions

Questions

Do you have a question about the product?

1 user has this product and can help you

Ask for the product

Description & Specifications

Introducing the submersible pump with double blade for dirty water, DDT, V370T, made of Stainless Steel, a product that belongs to the professional DDT series. This pump is one of the most efficient systems for pumping water from dirty sources.

Main advantages of the DDT submersible pump with double blade for dirty water:

  • Compact size: The pump can be used in hard-to-reach spaces, ideal for drains, cesspools, and toilets.
  • Long lifespan: The motor of the pump is made of solid copper, resistant to corrosion and mechanical stress.
  • Versatility: It can be used for both residential and commercial purposes, suitable for pumping dirty water.

Specifications:

  • Motor power: 370 W
  • Supply voltage: 220 V
  • Maximum speed: 2860 rpm
  • Color: Stainless Steel
  • Weight: 7 kg
  • Type of pump: Submersible pump
  • Material: Stainless Steel
  • Fuel type: Electricity
  • Current type: Single-phase
  • Starting type: Automatic
  • Package contents: 1 x Submersible pump
  • Motor type: Electric
  • Protection class: ICL B
  • Maximum temperature: 35°C
  • Outlet connection diameter: 1 inch
  • Inlet connection diameter: 1 inch
  • Maximum flow: 6 m³/h
  • Discharge height: 10 m
  • Suction depth: 7 m
  • Height: 40 cm
  • Diameter: 170 mm
  • Cable length: 8 m

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Voltage
Single-Phase

Voltage

Single-Phase

Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 
Horsepower
0.49 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
367.5 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Cable Length
10 m
Motor Rotation Speed
2860 rpm

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
No

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Outlet Nozzle
1"

Outlet Nozzle

The outlet nozzle refers to the point or the external diameter of the pump from which the pumped water or liquid exits. It is an important feature for determining the connection of the pump with the piping system and affects the flow capacity of the liquid.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
10 m

Maximum Head Height: 10


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Maximum Output
6 m³/h

Maximum Output

The maximum output or flow of a submersible water pump, as defined by the manufacturers, is the maximum amount of water the pump can move under ideal conditions, usually with zero head (i.e., no lift resistance).
Pump Submersion Depth
10 m
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
Yes

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (1)

5.0
1
5.0
Review this product
  1. 1
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product